May 5, 2021Summer Sanitation Is Important as Ever
To contact John Palumbo go to: jpalumbo@ag.Arizona.edu
Herbicide resistant weeds have received a lot of attention in recent years. It is often misunderstood. Three of the most misunderstood concepts regarding herbicide resistance are: 1- Weed tolerance and weed selection are not resistance,2- Weed resistance is not universal and does not affect every weed of a certain species from field to field or within a field and weed resistance often takes much longer than insect resistance that is more common and occurs faster.
No Herbicide controls all weeds. Those weeds that are not controlled are tolerant. They never were controlled by that particular herbicide and they are often selected for and become more prevalent over time if the same herbicide is used. Resistant weeds, on the other hand, were controlled at one time by a particular herbicide and have naturally developed a trait that stops the herbicide from working. These resistant weeds survive from generation to generation and become more prevalent over time.
Weed resistance does not occur in all weeds in a field at the same time. It can be just one plant of trillions in a field. As this plant survives the herbicide and goes to seed it becomes more widespread in the field and in other fields. We conducted a trial in Parker last year where sprangletop survived Glyphosate in one field and was killed by the same treatment down the road. If your neighbor has resistant weeds it doesn’t mean that you do too.
Lastly, insect resistance to insecticides has occurred in this region for many years and was the first exposure that many pest control advisers and growers had to pesticide resistance. The principals are the same although insects generally produce multiple generations per season and mutations that facilitate resistance occur faster than for weeds. Annual weeds often produce only one or two generations per season and resistance takes much longer.
Bindu Poudel, Martin Porchas, and Rebecca Ramirez
Yuma Agricultural Center, University of Arizona, Yuma, AZ
This study was conducted at the Yuma Valley Agricultural Center. The soil was a silty clay loam (7-56-37 sand-silt-clay, pH 7.2, O.M. 0.7%). Spinach ‘Revere’ was seeded, then sprinkler-irrigated to germinate seed Jan 13, 2019 on beds with 84 in. between bed centers and containing 30 lines of seed per bed. All irrigation water was supplied by sprinkler irrigation. Treatments were replicated four times in a randomized complete block design. Replicate plots consisted of 15 ft lengths of bed separated by 3 ft lengths of nontreated bed. Treatments were applied with a CO2 backpack sprayer that delivered 50 gal/acre at 40 psi to flat-fan nozzles.
Downy mildew (caused by Peronospora farinosa f. sp. spinaciae) was first observed in plots on Feb 12 and final reading was taken on March 20, 2020. Spray treatment were applied on February 14,19, 24, and 28 of 2020(see table). Disease severity was recorded by determining the percentage of infected leaves present within three 1-ft2 areas within each of the four replicate plots per treatment. The number of spinach leaves in a 1-ft2 area of bed was approximately 300.
The data (found in the accompanying table) illustrate the degree of disease reduction obtained by applications of the various tested fungicides. Two treatments Torac/Revus rotation, and Torac, provided the most effective disease control.
The autonomous agricultural robot industry is an incredibly fast-moving space. Startups, established companies and academic researchers are continuously putting forth new ideas and products. It’s hard to keep up with. In November of 2020, Future Farming (Misset Publisher, BV, Doetinchem, Netherlands) published a Field Robots Catalogue that provides a comprehensive overview of the state of autonomous ag robots. The article provides brief summaries of 35 autonomous ag robots that are currently commercially available. Along with a brief paragraph about what each robot does, the article presents information about how many robots from a particular manufacturer are actively being used, the cost of the machine, and links to a video of the device in action. Most of the robots are for weed management in vegetable crops. Kill mechanisms range from spot spraying to mechanical weed removal to electrocution. Several of the robots featured are applicable and relevant to Arizona vegetable production, and some are currently operating in the U.S. If you’re interested in ag robots and want to get up to date, this article is an excellent resource and quick read. The article can be found at the link provided below.
Title: Future Farming Field Robots Catalogue
Publisher: Misset Publisher, BV, Doetinchem, Netherlands.
The Yuma County Leaf Wetness Network remains in place for the 2018/19 vegetable season. Growers and PCAs may access information generated by the network by entering the following internet address: http://18.104.22.168:460
Upon entering the address above, you will be transferred to internet page that provides a series of tabs at the top of the page. Simply click on the tabs to access the information of interest.