Keeping Track of Major Produce Pests During the Summer (2024)
Hope you are all enjoying the summer so far and keeping busy. Although, we’re about 2 months away from the Fall produce season, it’s never too early to begin thinking of IPM strategies you will be using to battle key insects next season. This includes keeping track of their typical activity during June, July, and August. Below is a short discussion detailing individual pests.
Aphids: The major aphid species that are important in produce crops each spring include green peach aphid, foxglove aphid and lettuce aphid. These species are considered cool season pests and are biologically most active during the winter and spring when temperature average around (55-65 F). We do not find them on summer crops as the high temperatures prohibit their activity. They essentially become extinct each summer only to reappear in the fall to infest crops in Oct-Dec migrating into the desert via N-NW winds that occur after the monsoons.
Diamondback Moth (DBM): Another key pest that disappears each summer but for a different reason than for aphids. The host range of DBM is limited to only brassica crop and plants. Although brassica weeds are common during the winter, they occur during the summer due to high temperatures and dry conditions. Thus, like aphids, DBM populations from the previous spring season become “extinct” during the summer when brassica crops and weeds are absent. They reappear each fall migrating in on high winds associated with tropical storms from Mexico, or arrive into the region on infested brassica transplants from California.
Whiteflies: A resident pest that occurs year-round in the desert. As a warm season pest, whiteflies are most abundant on fall produce crops, and seldom a problem during the winter and spring. Peak abundance occurs during the summer months on cotton, and again in September and October on fall brassica, leafy vegetables and fall melons. Thus, it is important to control whiteflies in cotton prior to defoliation to prevent large migrations onto fall produce crops. In addition, whiteflies can be found on several weeds such as purslane, goosefoot, ground cherry, and sunflowers. Sanitation in and around fields being prepped for fall plantings is important. Preventatively, growers should consider applying soil, system insecticides such as imidacloprid or Verimark to Fall produce crops. Beet Armyworm (BAW): A warm-season pest that occurs year-round in the desert. They tend to reach peak abundance twice a year. Generally, the most important peak is in September and October when weather is ideal for their development, flight activity and oviposition. A second peak occurs in late spring. Activity is generally light during the summer, occurring primarily in alfalfa crops. Although BAW is known to migrate in from the south via monsoon and tropical storms, resident populations annually occur in alfalfa during the summer. Thus, to minimize BAW in fall produce crops, thorough management of BAW can potentially minimize their movement onto Fall produce crops. Weeds are also a source of BAW (purslane, goosefoot, sunflower and Russian thistle) so sanitation in and around fields is important.
Western Flower Thrips (WFT): Also a resident pest that can be found in the desert year round. WFT is most abundant on lettuce in the late spring, but peaks in abundance on alfalfa, melons and cotton is May and June. During the late summer numbers drop dramatically where thrips can be found on melons and alfalfa and weeds like goosefoot and purslane. WFT slowly move into lettuce again in early fall and are least abundant during the winter. Sanitation of weeds during the summer can help reduce thrips abundance moving into the fall crops and weeds.
The soft-rot bacterium, Erwiniacarotovora subsp. carotovora (syn.= Pectobacteriumcarotovorum subsp. carotovorum), enters through growth cracks or wounds caused by cold temperatures, insects, other disease organisms, or by mechanical means. Under warm, humid conditions, uninjured tissue may become infected through natural openings. Prolonged moisture from rain or irrigation and mild temperatures encourage disease development. Insects, tools, rain, clothing, or affected plant tissue can spread the bacteria. The bacteria survive in soil and plant debris.
Symptoms appear as small, water-soaked areas and enlarge rapidly. Tissue becomes soft and mushy, and within a few days the affected plant part may collapse. An offensive odor usually is present.
Management:
Cultural:
Set out plants in rows to allow good air drainage.
Cultivate carefully to minimize injuring plants.
Control frequency and source of irrigation water.Avoid frequent irrigation during head development. Time irrigation to allow the head to dry rapidly. Avoid stagnant water sources.
Clean and spray storage walls and floors with copper sulfate solution (1 lb/5 gal water). Bactericides such as Clorox, Lysol, and quaternary ammonium products also are effective.
In storage, use a buffering material such as straw or paper to prevent injury to the heads.
Keep storage house humidity between 90% and 95% and the temperature between 32°F and 39°F.
Chemical control
Cueva at 0.5 to 2 gal/100 gal water on 7- to 10-day intervals. May be applied on the day of harvest. 4-hr reentry.
Cease at 3 to 6 quarts in 100 gal water. For greenhouse plants only. Preharvest interval is 0 days. 4-hr reentry.
Band-Steam Applicator for Controlling Soilborne Pathogens and Weeds in Lettuce
Steam sterilization of soils is commonly used in plant nurseries and greenhouses for effective control of soilborne pathogens and weed seeds. The technique, however, is highly energy intensive as the entire soil profile is heated. This is too costly and slow to be practical for field scale vegetable production. To reduce energy consumption and cost, use of band-steaming, where steam is applied only in the area where it is needed – in the plant root zone, is proposed. In this method, narrow strips of soil centered on the seed line are treated with steam rather than the whole bed.
Over the course of the last year, we developed a prototype band-steam and co-product applicator that is designed to raise soil temperatures in a band 2” deep by 4” wide to levels sufficient to control soilborne pathogens (140 °F for > 20 minutes) and weed seed (150 °F for > 20 minutes). The device is principally comprised of a 35 BHP steam generator and a co-product applicator mounted on top of a bed shaper (Fig.1). The apparatus applies steam via shank injection and from cone shaped ports on top of the bed shaper. An exothermic compound can be co-applied via shank injection and/or a banding spray nozzle. The rationale behind co-applying an exothermic compound with steam is that exothermic compounds react and release heat when combined with water, thereby reducing energy requirements and increasing travel speed.
Preliminary testing of the device this spring in Yuma, AZ were very promising. Trial results showed that application of steam alone effectively raised soil temperature in the center of the seed line to levels required for effective pest control (140 °F for more than 20 minutes). Use of the exothermic compound increased soil temperature by about 10 °F. A video of the device in action can be found at the link provided below.
We are currently evaluating the device in field trials with lettuce in Salinas, CA. Target pests in these experiments conducted in collaboration with Steve Fennimore, UC Davis, are soil pathogens which cause Sclerotinia lettuce drop and in-row weeds. Future articles will report the findings of this research.
This fall, we will be replicating these tests in Yuma, AZ and also investigating the effectiveness of band-steam for controlling Fusarium oxysporum f. sp. lactucae which causes Fusarium wilt of lettuce. Heat has been shown to effectively kill Fusarium oxysporum spores and control Fusarium wilt disease. As an example, soil solarization, where clear plastic is placed over crop beds during the summer, raises soil temperatures to 150-155˚F at the soil surface, effectively killing the pathogen and reducing disease incidence by 45-98% (Matheron and Porchas, 2010).
These projects are sponsored by USDA-NIFA, the Arizona Specialty Crop Block Grant Program and the Arizona Iceberg Lettuce Research Council. We greatly appreciate their support.
If you are interested in seeing the machine operate or would like more information, please feel free to contact me.
See the band-steam and co-product applicator in action!
References:
Matheron, M. E., & Porchas, M. 2010. Evaluation of soil solarization and flooding as management tools for Fusarium wilt of lettuce. Plant Dis. 94:1323-1328.
Sprangletop has become increasingly widespread in Arizona mostly because of its growth habits and tolerance to many commonly used herbicides. It is in the Leptochloa genus which is derived from the Greek words leptos (thin) and chloa (grass). There are more than 150 species of sprangletop worldwide but only three in Arizona and two in Yuma County. The two that are the most common in the low desert are Mexican Sprangletop, which is Leptochloa uninervia and Red Sprangletop, Leptochloa filiformis. A third species, Bearded Sprangletop, Leptochloa fascicularis, is more common at higher elevations of 1500 feet or higher. It is not uncommon to find both Red and Mexican Sprangletop in the same field and it is not hard to distinguish them when they are side by side. Red Sprangletop has a light green leaf blade which is similar in width to watergrass and barnyardgrass. It has very fine hairs and very small and fine branches and spiklets. It also has a long membranous ligule. The name Red refers to the leaf sheath, which is characteristically red, rather than the seed head. Mexican Sprangletop has a thinner leaf blade which is darker green or grayish in color and similar in appearance to common bermudagrass. The seed head is distinctly coarser than that of Red Sprangletop. Side by side, leaf color and size of the seed make it easy to distinguish these two. Both of these grasses are classified as summer annuals, but they grow more like perennials in the low desert. Sprangletop does very well in the hottest part of the summer and typically germinates from seed during the hottest period between July and September. Once established, however, it often survives through the cold winter months. It grows into clumps that often appear to be dead during the winter. New shoots commonly grow from these established crowns the next season. When this occurs, preemergent herbicides such as Trifluralin or Prowl are ineffective. Some Sprangletop plants stay green and grow through the winter. Many of the postemergence, grass specific herbicides that control many grasses are ineffective on Sprangletop. This also has contributed to the spread of these weeds. Sethoxydim (Poast) and Fluazifop (Fusilade) do not control either Red or Mexican sprangletop. Only Clethodim (Select Max, Select, Arrow and others) is the only one of these grass herbicides that is effective and only at the highest labeled rates. Two applications are often necessary to achieve season long control.
Corn earworm:
CEW moth counts are down areawide and average for this time of year.
Beet armyworm:
Trap counts decreased in most locations; about average compared to previous years.
Cabbage looper:
Cabbage looper counts increased in most traps and about average for this time of season.
Diamondback moth:
DBM moths continue to increase in all areas. Below average for this time of the year.
Whitefly:
Adult movement negligible, typical for early January.
Thrips:
Thrips adult counts beginning to decreased in the past 2 weeks, likely in response to rainfall in late December. Currently, numbers are about average compared with previous years.
Aphids:
Aphid movement increased significantly in the past two weeks, particularly in North Yuma and Gila Valleys. Well above average for early January.
Leafminers:
Adults decreased in most locations, but above average for January.
