Temperatures are still warm and worm pressure remains steady in most growing areas.   Here at the Ag Center, beet armyworm pressure is about average for early October, and still troublesome on new stands. Cabbage looper eggs are beginning to now show up. Pheromone trap counts for armyworm and loopers remain below average in most areas. However, diamondback moth larvae are present on broccoli and transplants at the Ag Center.  I’ve had several PCA reports of diamondback pressure in transplanted brassica crops in Wellton and Roll, and in the Yuma Valley. Trap catches have begun to increase also. So far, all insecticide products we’ve tested are providing good Lep control and no complaints from the field.  
 
Fortunately for local PCAs, several insecticide alternatives are available that provide excellent residual activity on Lep pests.   Perhaps equally important, many of the products have unique modes of action (MOA) that can be alternated throughout the growing season. This is important because the most fundamental way to reduce the risk of insecticide resistance is to eliminate exposure of multiple generations of Leps to the same MOA.   By using a different MOA on each subsequent spray application, you can minimize the risk of resistance by Lep larvae to these insecticide compounds. In contrast, repeatedly applying insecticide products with the same MOA for Lep control in the same area will significantly increase the risk of resistance.  This is particularly important with the Diamide group of insecticides (IRAC group 28). These products can be applied as both foliar sprays and soil systemic treatments, and currently 7 Diamide products are labeled for use in leafy vegetables - all with the same MOA (Coragen, Durivo, Besiege, Minecto Pro, Verimark, Exirel and Harvanta).  To avoid confusion among the Diamides, the IRAC group number (28) is placed on each label, adjacent to the product name.  Furthermore, applying a Diamide product (i.e., Coragen/Verimark) to the soil at planting or as a tray drench, and then subsequently applying Diamide foliar sprays (i.e., Harvanta/Besiege) on the same field is not a good idea as it can expose multiple generations of Leps to the same MOA.  For example, under ideal weather conditions, one could potentially expose 5-6 generations of BAW or DBM to the same MOA given the residual efficacy of the diamides.  That’s not a good way to use these products if you want them to remain effective.   Since the Diamides, as well as the other key products currently available (e.g., Radiant, Proclaim, Intrepid, Avaunt, Bts), are critical to effective management of Leps in leafy vegetables, PCAs should consciously avoid the overuse of any of these compounds. The most effective way to delay the onset of resistance by Leps in leafy vegetables is to consider the recommendations provided in the guidelines entitled Insecticide Resistance Management for Beet Armyworm, Cabbage Looper and Diamondback Moth in Desert Produce Crops.

As we wrap up lettuce season and move towards melon season, bacterial wilt of cucurbit is a disease we have to keep an eye on. Couple of years ago we had high incidence of this disease in fields. 
 
Bacterial wilt is a common occurrence in commercial fields and residential gardens. This destructive disease can potentially result in complete crop loss even before the first harvest. Hosts Cucumber and muskmelon (cantaloupe) are highly susceptible; squash and pumpkin are less susceptible; watermelon is resistant.
  Initially, individual leaves or groups of leaves turn dull green and wilt (Figure 1), followed by wilting of entire runners or whole plants. At first, plants may partially recover at night, but as disease progresses, wilt becomes permanent. Collapsed foliage and vines turn brown (necrotic), shrivel, and die (Figure 2). Wilt symptoms may be noticeable in as few as 4 days from infection on highly susceptible hosts but can take up to several weeks to become evident on crops that are less susceptible. Plant growth stage can also affect disease progress, which is more rapid on young, succulent plant tissues.

The diagnostic feature for this disease is the emission of a slimy, sticky ooze (exudate made of polysaccharides and bacterial cells) from cut stems. Field diagnosis can be confirmed using a simple “bacterial ooze test.” With a sharp knife, cut through a wilted (but not dead) vine; use a section near the crown (Figure 3A). Touch the cut ends together, and then slowly pull them apart. Fine thread-like strands of bacterial ooze will be drawn out (Figure 3B) when bacteria are present. This test works well for cucumber and muskmelon but is less reliable for squash or pumpkin. If this disease is present, a cloudy string or mass of bacterial ooze will flow into the water from the cut stem pieces (Figure 3C). 
 
Bacterial wilt is caused by Erwinia tracheiphila; striped and spotted cucumber beetles (Fig 4 and 5) serve as vectors, carrying the bacterium from plant to plant during the growing season. The life cycles of the bacterial wilt organism and its vectors are closely associated, and bacterial wilt is directly correlated to striped and spotted cucumber beetle populations. These beetles hibernate through winter under leaf litter and in other protected sites; all the while, the bacterial wilt pathogen overwinters within the gut of the striped cucumber beetle. The beetles become active once temperatures remain above 55°F in spring. As soon as cucurbit seedlings begin to break through the ground, the beetles begin to feed on cotyledons and later feed on leaves, stems, and flowers. Striped cucumber beetle larvae also feed on root systems, causing damage that can result in wilt. The bacterial wilt organism is deposited through beetle mouthparts and the frass deposited onto/ into wounds created during beetle feeding. Once the bacterium invades a plant’s water conducting vessels (xylem), it spreads rapidly throughout the plant. The matrix of bacteria and ooze obstructs water movement in the xylem vessels, which causes wilt symptoms. Further spread of the pathogen occurs when beetles feed on diseased plants and then feed on nearby healthy plants. Close to harvest, a second generation of striped cucumber beetle may acquire the bacterium while feeding on infected plant tissues. Fall-planted cucurbits may be infected by this generation. These late-season adults will overwinter with the live bacterium in their gut and possibly transmit the pathogen to young plants the next spring. The bacterium cannot survive in infected plant debris from one season to the next. 
Prevention of bacterial infections is dependent upon preventing cucumber beetle vectors from feeding on cucurbit plants. Early protection is critical for long-term disease management, which should begin as soon as seedlings emerge or when plants are transplanted into fields or gardens. Once it is evident that plants are infected, they should be removed from the site and destroyed. An early, aggressive management approach has been shown to reduce amounts of disease later in the season.

Start an insecticide program as soon as seedlings emerge or immediately after transplanting. This is critical to protecting very small plants from beetle feeding and, ultimately, from bacterial wilt. Bactericides are not recommended for management of bacterial wilt disease. Plastic and reflective mulches, crop rotation have shown promising effect against the insects. 
 
 
More information: http://plantpathology.ca.uky.edu/

Steam sterilization of soils is commonly used in plant nurseries and greenhouses for effective control of soilborne pathogens and weed seeds. The technique, however, is highly energy intensive as the entire soil profile is heated. This is too costly and slow to be practical for field scale vegetable production.  To reduce energy consumption and cost, use of band-steaming, where steam is applied only in the area where it is needed – in the plant root zone, is proposed. In this method, narrow strips of soil centered on the seed line are treated with steam rather than the whole bed.

Over the course of the last year, we developed a prototype band-steam and co-product applicator that is designed to raise soil temperatures in a band 2” deep by 4” wide to levels sufficient to control soilborne pathogens (140 °F for > 20 minutes) and weed seed (150 °F for > 20 minutes). The device is principally comprised of a 35 BHP steam generator and a co-product applicator mounted on top of a bed shaper (Fig.1). The apparatus applies steam via shank injection and from cone shaped ports on top of the bed shaper. An exothermic compound can be co-applied via shank injection and/or a banding spray nozzle. The rationale behind co-applying an exothermic compound with steam is that exothermic compounds react and release heat when combined with water, thereby reducing energy requirements and increasing travel speed.

Preliminary testing of the device this spring in Yuma, AZ were very promising. Trial results showed that application of steam alone effectively raised soil temperature in the center of the seed line to levels required for effective pest control (140 °F for more than 20 minutes). Use of the exothermic compound increased soil temperature by about 10 °F. A video of the device in action can be found at the link provided below.

We are currently evaluating the device in field trials with lettuce in Salinas, CA. Target pests in these experiments conducted in collaboration with Steve Fennimore, UC Davis, are soil pathogens which cause Sclerotinia lettuce drop and in-row weeds. Future articles will report the findings of this research.

This fall, we will be replicating these tests in Yuma, AZ and also investigating the effectiveness of band-steam for controlling Fusarium oxysporum f. sp. lactucae which causes Fusarium wilt of lettuce. Heat has been shown to effectively kill Fusarium oxysporum spores and control Fusarium wilt disease. As an example, soil solarization, where clear plastic is placed over crop beds during the summer, raises soil temperatures to 150-155˚F at the soil surface, effectively killing the pathogen and reducing disease incidence by 45-98% (Matheron and Porchas, 2010). 

These projects are sponsored by USDA-NIFA, the Arizona Specialty Crop Block Grant Program and the Arizona Iceberg Lettuce Research Council.  We greatly appreciate their support.

If you are interested in seeing the machine operate or would like more information, please feel free to contact me.

See the band-steam and co-product applicator in action!

References: Matheron, M. E., & Porchas, M. 2010. Evaluation of soil solarization and flooding as management tools for Fusarium wilt of lettuce. Plant Dis. 94:1323-1328.

Sprangletop has become increasingly widespread in Arizona mostly because of its growth habits and tolerance to many commonly used herbicides. It is in the Leptochloa genus which is derived from the Greek words leptos (thin) and chloa (grass). There are more than 150 species of sprangletop worldwide but only three in Arizona and two in Yuma County. The two that are the most common in the low desert are Mexican Sprangletop, which is Leptochloa uninervia and Red Sprangletop, Leptochloa filiformis. A third species, Bearded Sprangletop, Leptochloa fascicularis, is more common at higher elevations of 1500 feet or higher. It is not uncommon to find both Red and Mexican Sprangletop in the same field and it is not hard to distinguish them when they are side by side. Red Sprangletop has a light green leaf blade which is similar in width to watergrass and barnyardgrass. It has very fine hairs and very small and fine branches and spiklets. It also has a long membranous ligule. The name Red refers to the leaf sheath, which is characteristically red, rather than the seed head. Mexican Sprangletop has a thinner leaf blade which is darker green or grayish in color and similar in appearance to common bermudagrass. The seed head is distinctly coarser than that of Red Sprangletop. Side by side, leaf color and size of the seed make it easy to distinguish these two. Both of these grasses are classified as summer annuals, but they grow more like perennials in the low desert. Sprangletop does very well in the hottest part of the summer and typically germinates from seed during the hottest period between July and September. Once established, however, it often survives through the cold winter months. It grows into clumps that often appear to be dead during the winter. New shoots commonly grow from these established crowns the next season. When this occurs, preemergent herbicides such as Trifluralin or Prowl are ineffective. Some Sprangletop plants stay green and grow through the winter. Many of the postemergence, grass specific herbicides that control many grasses are ineffective on Sprangletop. This also has contributed to the spread of these weeds. Sethoxydim (Poast) and Fluazifop (Fusilade) do not control either Red or Mexican sprangletop. Only Clethodim (Select Max, Select, Arrow and others) is the only one of these grass herbicides that is effective and only at the highest labeled rates. Two applications are often necessary to achieve season long control.

Results of pheromone and sticky trap catches can be viewed here.

Corn earworm: CEW moth counts down in most traps over the last week; about average for early October.

Beet armyworm: Trap counts increased in several areas last week, and about average for early October.

Cabbage looper: Cabbage looper trap counts increased in most locations, but still below average for this time of the season.

Diamondback moth: Adult activity spiked 2 weeks ago, particularly in the Yuma and Dome Valleys, but down over the past week. Average for this time of season.

Whitefly: Adult movement increasing Tacna consistent with melon harvests; overall about average for early October.

Thrips: Thrips adult movement peaked 2 weeks ago but down ovr the past week, overall activity above average.

Aphids: Winged aphids beginning to show up the north Yuma and Gila Valleys; below average for October.

Leafminers: Adult activity increased significantly last week in several locations, above average for this time of season.