May 5, 2021Summer Sanitation Is Important as Ever
To contact John Palumbo go to: jpalumbo@ag.Arizona.edu
Oxyfluorfen,(Goal and Galigan) has become a popular and effective herbicide for use on cole crops even though it was first registered in the 1980’s. Oxyfluorfen is a contact herbicide with the same mode of action as Chateau, Aim, Shark, Gramoxone, Paraquat , Sharpen and ET. They are all PPO Inhibitors that rupture cell membranes. Carfentrazone (Aim, Shark), ET and Paraquat (Gramoxone), are effective only as postemergence applications to small weeds, Sharpen and Goal are effective both preemergence and early postemergence and Chateau is used only preemergence but can cause severe crop injury if mixed with a surfactant. The only one of these that is registered for cole crops is Oxyfluorfen (Goal, GoalTender, Galigan). It does not make sense for a contact herbicide to be used on weeds that have not emerged. The way this works is that a barrier is created with the herbicide on the surface that kills the seedling weeds as they come in contact with it. It is important not to disturb this barrier or the weeds will not be affected. Oxyfluorfen (Goal) is an herbicide that defies reason in other ways as well. It normally adheres strongly to the soil and has very low water solubility. It is well known, however, that Goal can lift off of the surface and cause crop injury. When this happens, it is evaporating or going from a liquid to a gas and this is unaffected by its solubility or adsorption. It also works well when chemigated through a sprinkler system. You would think that it would wash off, but it works well with less crop injury when chemigated. Chemigation is registered for onions only but it works well with cole crops as well. It only takes half as much (4 ounces) and is safer to the crop when chemigated. It is best to apply it about 2/3 of the way through the sprinkler run to keep it in place and flush the system.
With the end of lettuce season, it does feel like a relief from the recent INSV (Imaptiens necrotic spot virus) breakout we had. However, we have to keep in mind that INSV has a very wide host range. It is a common virus in ornamentals. Below is just a small list of ornamental plants that could be a host of INSV. If you have these plants and see any concerning symptoms, please bring them to the plant clinic to test for INSV.
INSV is the first virus to be recorded from a fern (the glasshouse ornamental Asplenium nidus-avis).
|Dendranthema x grandiflorum||Eustoma grandiflorum|
|Gladiolus||Imaptiens (New Guinea, Balasam)|
|Senecio cruentus||Sinningia speciose|
Vol. 12, Issue 7, Published 4/7/2021
Over the last several years, there has been a tremendous amount of research activity towards the development of autonomous agriculture vehicles. A quick internet search will reveal over 50 companies or university research groups working in this space. A question I get often from groups developing such platforms is “What is a good agricultural application for our lightweight “robot”?”. It’s a great question, and for Arizona vegetable production, it’s also one that I’m not sure I have a satisfying answer for.
The calls I get regarding autonomous robots are mostly related to automated weeding applications. Automated weeding machines are commercially available, but their adoption has been limited not because of labor costs for tractor operation, rather it is the lack of the development of a functional and cost-effective means for identifying and removing weeds.
For decades, researchers have been attempting to develop sensing systems that are able to reliably detect weeds. Techniques such as 2-D and 3-D color imaging, x-rays, hyperspectral sensing and artificial intelligence have been tried (Slaughter, 2014; Bender et al., 2020). The best performing systems provide about 96% accuracy, meaning that 4% of the crops plants are identified as weeds and would be destroyed by the weeder. For high value vegetable crops like lettuce with gross revenues of roughly $10,000 per acre, killing 4% of the crop equates to $400 per acre of losses. Economically, this does not make sense as hand weeding labor costs are typically $300 per acre or less. The other main issue is that current automated weeding technologies are not highly precise and provide only partial control. Our studies with these types of machines have shown that these systems remove only about 1/3rd of the in-row weeds (Lati, et al., 2016) and a follow up hand weeding operation is often necessary. To be highly cost effective, elimination of the hand weeding step is needed.
In short, my recommendation to research groups asking about applications for autonomous robots is that their time and technical skills would best be served developing reliable crop/weed differentiation systems and a technique to remove a very high percentage of weeds.
Bender, A., Whelan, B. & Sukkarieh, S. 2020. A high‐resolution, multimodal data set for agricultural robotics: A Ladybird's‐eye view of Brassica. J. Field Robotics. 37(1): 73-96.
Lati, R.N, Siemens, M.C., Rachuy, J.S. & Fennimore, S.A. (2016). Intrarow Weed Removal in Broccoli and Transplanted Lettuce with an Intelligent Cultivator. Weed Technology, 30(3), 655-663.
Slaughter, D.C. The biological engineer: Sensing the difference between crops and weeds. Autonomous robotic weed control systems: A review. Computers and Electronics in Agriculture 61(2008): 63-78.
The Yuma County Leaf Wetness Network remains in place for the 2018/19 vegetable season. Growers and PCAs may access information generated by the network by entering the following internet address: http://22.214.171.124:460
Upon entering the address above, you will be transferred to internet page that provides a series of tabs at the top of the page. Simply click on the tabs to access the information of interest.
Beet armyworm: Moth activity has declined in most trap location and remains below average for this point in the season.
Cabbage looper: Cabbage looper activity remains unusually low for early November. Trap catches picked up a bit in Wellton and Gila Valley.
Whitefly: Adult movement has been about average for this time of year. Activity highest in Wellton near fall melons being harvested.
Thrips: Thrips activity picking up significantly in several trap locations; activity increased significantly in Bard and Dome and Gila Valleys.
Aphids: Aphid numbers peaked last week in many locations, particularly in the Gilas and Yuma Valleys.
Leafminers: Adult activity increased significantly last week, particularly in the Wellton area near melons.