Fall melon production is underway and transplanting/direct seeding of produce crops is not far behind. So, PCAs will soon be faced with several important insect management decisions.  As crops begin to emerge, you can expect to encounter several insect species that can potentially cause serious economic losses to crop stands.  These seedling pests include flea beetles, crickets, grasshoppers, darkling beetles, earwigs, and saltmarsh caterpillars (‘woolly worms’). These insects all have chewing mouthparts, and most are capable of consuming large amounts of leaf tissue in a short period of time. Seedling crops at the cotyledon stage are most susceptible; these pests can devour entire cotyledons or outright kill small seedlings.  If left unprotected, transplants and larger seedling plants can sustain significant feeding damage on the terminal growing points or newly emerged leaves.  Not only can this feeding stunt plant growth but can result in lack of stand uniformity and ultimately, lack of uniform maturity at harvest. Host crop sources for flea beetle, crickets and "woolly worm" infestations include several summer crops (e.g., Sudan grass, cotton, and alfalfa), volunteer melons, and weeds (e.g., purslane, pigweed). I have been seeing a considerable number of pale stripped flea beetles on alfalfa recently. Fortunately, growers have been vigilant about field sanitation, and weeds are few and far between throughout the valleys. Crickets have also been especially abundant this summer, so keep a sharp eye for them, particularly under sprinkler pipe.    Salt marsh caterpillars have not been reported to date, but are known to disperse from alfalfa and cotton, particularly Pima cotton (non-Bt).  Experience suggests that melon fields planted next to these crops/weedy areas are at a high risk from these seedling pests, particularly flea beetles. As summer crops are harvested or terminated during the next several weeks, these seedling pests typically move to the next available host crop; lettuce, cole crops and melons.  Fortunately, there are many registered insecticide alternatives available that can be applied via sprinkler chemigation (i.e., pyrethroids) or foliar sprays (i.e., pyrethroids, methomyl, neonicotinoids) that can cost-effectively minimize their abundance and damage to susceptible produce and melon seedlings. Additionally, insecticide seed treatments are available for lettuce and broccoli that will protect stands from flea beetles and bagrada bug (i.e., NipsIt).  For more information on insect pests of leafy vegetables and melons at stand establishment please see Insect Management on Desert Produce and Melons: Pests at Stand Establishment.

There are more than 100 chemical elements known to man today.  However, only 16 have been proven to be essential for plant growth.  The essential elements for plant growth are in the upper portions of the periodic table with lower atomic numbers, indicating the lighter and more volatile elements that are in higher concentrations closer to the earth’s surface and part of the rocks that commonly serve as the parent materials for soils.
 
For a nutrient to be classified as essential, certain rigid criteria must be met.  These criteria are as follows (Havlin, et al., 2014; Troeh and Thompson, 2005; Weil and Brady, 2017; Warren et al., 2017):
 

1. The element is essential if a deficiency prevents the plant from completing its vegetative or reproductive cycle.
2. The element is essential if the deficiency in question can be prevented or corrected only by supplying the element.
3. The element is essential if it is directly involved in the nutrition of the plant and is not a result of correcting some microbiological or chemical condition in the soil or culture media.

 
The essential elements and their chemical symbols are listed in Table 1.  Three of the 16 essential elements – carbon, hydrogen and oxygen – are supplied mostly by air and water.  These elements are used in relatively large amounts by plants and are non-mineral, often referred to as organic nutrients and they are supplied to plants by carbon dioxide and water. 
 
The other 13 essential elements are mineral elements and must be supplied by the soil and/or fertilizers.  Not all are required for all plants, but all have been found to be essential to some (Tisdale & Nelson).
 
 
 
Table 1.  Essential plant nutrients, chemical symbols, and sources.

Mostly from air and water (non-mineral)	Mostly from air and water (non-mineral)	From soil and/or fertilizers (mineral)	From soil and/or fertilizers (mineral)	From soil and/or fertilizers (mineral)	From soil and/or fertilizers (mineral)
Element	Symbol	Element	Symbol	Element	Symbol
Carbon	C	Nitrogen	N	Iron	Fe
Hydrogen	H	Phosphorus	P	Manganese	Mn
Oxygen	O	Potassuim	K	Zinc	Zn
		Calcium	Ca	Copper	Cu
		Magnesium Mg	Mg	Boron	B
		Sulfur	S	Molybdenum	Mo
				Cholorine	Cl

 
 
The essential plant nutrients may be grouped into three categories.  They are as follows:
 

1. Primary nutrients - nitrogen, phosphorus and potassium
2. Secondary nutrients - calcium, magnesium and sulfur
3. Micronutrients - iron, manganese, zinc, copper, boron, molybdenum, and chlorine

 
This grouping separates the elements based on relative amounts required for plant growth and is not meant to imply any element is more essential or important than another (Troeh and Thompson, 2005; Weil and Brady, 2017; Warren et al., 2017).
 
Primary Non-Mineral Nutrients: Carbon, Hydrogen and Oxygen
Carbon is the backbone of all organic molecules in the plant and is the basic building block for growth.  After absorption of carbon dioxide (CO₂) by the leaves of the plant, carbon is transformed into carbohydrates by combining with hydrogen and oxygen through the process of photosynthesis.
 
Metabolic processes within the plant transform carbohydrates into amino acids and proteins and other essential components.
 
The essentiality of all mineral nutrients is associated with their use in structural plant components and/or physiological and biochemical reactions associated with essential processes in plant growth and development.  Plants cannot complete the life cycle if they are deficient in an essential nutrient.
 
References
Havlin, J.L., Beaton, J.D., Tisdale, S.L. and Nelson, W.L. 2014. Soil Fertility and Fertilizers; An Introduction to Nutrient Management. 6th Edition, Prentice Hall, Upper Saddle River, NJ.
Troeh, F.R. and Thompson, L.M. (2005) Soils and Soil Fertility. Sixth Edition, Blackwell, Ames, Iowa, 489.
Warren, J., H. Zhang, B. Arnall, J. Bushong, B. Raun, C. Penn, and J. Abit. Oklahoma Soil Fertility Handbook. Published Apr. 2017; Id: E-1039
Weil, R.R. and Brady, N.C. (2017) The Nature and Properties of Soils. 15th Edition, Pearson, New York.

This study was conducted at the Yuma Valley Agricultural Center. The soil was a silty clay loam (7-56-37 sand-silt-clay, pH 7.2, O.M. 0.7%). Variety: Deluxe (HMX2595) was seeded, then sprinkler-irrigated to germinate seed on March 20, 2024on 84 inches between bed centers. All other water was supplied by furrow irrigation or rainfall. Treatments were replicated five times in a randomized complete block design. Each replicate plot consisted of 25 ft of bed. Treatment beds were separated by single nontreated beds. Treatments were applied with a tractor-mounted boom sprayer that delivered 50 gal/acre at 100 psi to flat-fan nozzles spaced 12 in apart. 

Spray treatments were done on 05-21-2024, 05-31-2024, 06-07-2024 and 06-14-24. Powdery mildew was first seen on 06-05-24. Please see excel file for additional details.  

Disease severity of powdery mildew (caused by Sphaerotheca fuliginea and S. fusca) severity was determined 6-17-2024 by rating 10 plants within each of the four replicate plots per treatment using the following rating system: 0 = no powdery mildew present; 1 = one to two mildew colonies on leaves  ;2 = powdery mildew present on one quarter of leaves; 3 = powdery mildew present on half of the leaves; 4 = powdery mildew present on more than half of leaf surface area ; 5 = powdery mildew present on entire leaf. These ratings were transformed to percentage of leaves infected values before being statistically analyzed.

The data in the table illustrate the degree of disease control obtained by application of the various treatments in this trial. Most treatments significantly reduced the final severity of powdery mildew compared to nontreated plants. Quintec, Merivon, Tesaris, Luna Sensation, and V6M-5-14 V gave the best disease control. Phytotoxicity symptoms were not noted for any treatments in this trial.

ANR Webinar 10/17 click link for details.

Interested in more information about mechanical weed control in vegetable crops? Check out this seminar given by Sam Hitchcock Tilton, Lakeshore Technical College. Topics covered include weed ecology, systems-based strategies for weed control, new and emerging machines on the market, individual tools and implements and best-use strategies for cultivating equipment. Although the target audience is small-scale vegetable growers, Sam gives many practical tips and insights that are applicable to large-scale vegetable farms. Even if you’re very knowledgeable about mechanical cultivation, this entertaining seminar is a good refresher on the basics of integrated weed management and one I think you’ll find interesting and informative.

 

Fig. 1. Sam Hitchcock Tilton presenting seminar entitled “Mechanical Weed
Control and Weed Ecology in Vegetable Production”. Click the video above to view a recording of the presentation. (Photo credits: Practical Farmers of Iowa,
Ames, IA).

Wanted to share the following weed germination calendars now that the season has begun. Some summer weeds withstand part of the winter and some winter annuals the summer, so these charts are general guidelines. We hope this helps for making management decisions in your operation.

As the intense heat of the Yuma summer finally fades, cooler days bring the promise of lush fields which set the stage for a vibrant growing season. However, the cooler weather also signals the arrival of seasonal pests, ready to take advantage of your organic fields. These pests tend to have an especially strong appetite for organic crops, making it essential to stay vigilant. Thus, it is important to implement appropriate IPM techniques to combat these insect pests effectively. It is crucial to plant resistant varieties, scout regularly, ensure your crops are healthy, diversify your crops, use physical/mechanical control, enhance biological control, or apply biopesticides when necessary. 

Remember, some IPM tactics may be unsuitable in some situations because IPM is not a one-size-fits-all. Therefore, an IPM program should be planned on a case-by-case basis. 

Area wide Insect Trapping Network   VegIPM Update, Vol. 13, No. 1, Jan 12, 2022
 
Results of pheromone and sticky trap catches can be viewed here.
 
Corn earworm:            
CEW moth counts remain low across all locations; average for this time of the season. 
 
Beet armyworm:         
Trap counts decreased in all locations, and well below average for mid- winter. 
 
Cabbage looper:           
Cabbage looper trap counts remained low in most locationssand below average for early January.
 
Diamondback moth:   
Adult activity steadily increasing during December. Above average for this time of year. Activity highest in Bard, Gila and Dome Valleys associated with nearby brassica seed crops. 
 
Whitefly:                      
Adult movement remained low in all locations consistent with previous seasons.
 
Thrips:                         
Thrips adult movement decreased in most locations last week, but increased sharply in Roll. Activity about average for mid-winter.
 
Aphids:                         
Aphid movement low in all locations. Trap captures average for this time of season. 

Leafminers:                  
 Adult activity decreased in all areas, about average for this time of season.