The 2012 Lettuce Insect, Disease, and Weed Losses Workshop will be conducted Wednesday, April 11 at the Yuma Agricultural Center from Noon until 2:00 pm - lunch will be provided. This workshop has been invaluable to our VegIPM Team because it allows us to develop accurate real world data on crop losses and pesticide usage which is important to the assessment of our IPM programs in Arizona. Quantifiable measurements of pesticide use patterns, costs, target pests, and yield/quality losses due to key insect, disease, and weeds are our most objective tools for assessing change in our systems. These data allow us to build relevant databases for measuring user behaviors and adoption of new IPM technologies. This is information important for several reasons. First, specific data on pesticide use patterns and pest losses can be useful for providing information to EPA and other regulatory agencies in submitting Section 18 and 24c requests, as well as support the tolerance of older active ingredients that are critical to the lettuce industry. In addition, it can directly demonstrate the value of new pest control technologies and IPM tactics. From an academic perspective, these databases help to re-direct the efforts of the College of Agriculture by providing key stakeholder input to our applied research and extension programs. This real world input from the industry documents the relevancy of key pest problems and has become mandatory for competing for federal grant funding. Finally, for PCAs, it can translate their efforts into economic terms for their clientele and confirms their value to the lettuce industry by showing the importance of key insect pests and their cost-effective management in desert lettuce production. So we hope you can make it to the workshop and participate in this important process (2 - AZ/CA CEUs have been requested).

As reductions of agricultural water allocations in central Arizona from the Colorado River are going into place in 2022 from the Tier 1 of the Drought Contingency Plan provisions, it is important for every segment of the Arizona agricultural industry to continue to review and refine our practices associated with water management and irrigation.  
 
Seasonal conditions are a benefit to vegetable crop production and water management in the desert Southwest, both in terms of cool-season crop adaptability and the general climatic conditions that create lower environmental crop water-use demands.  For example, based on more than 30 years of Arizona Meteorological Network (AZMET) data from the Yuma, Arizona area, approximately 20% of the total annual reference evapotranspiration demand typically occurs between August and May.  
 
Reference evapotranspiration (ETo) is the collective loss of water from a field due to evaporation from the soil surface and transpiration of water vapor from the plants.  Collectively, water movement from the soil and plant systems in a field is referred to as “crop consumptive use” and it is important to understand this process in our efforts to steward our water resources most effectively.
 
The AZMET system provides both historical and real-time weather information that can be used to assist in crop water and irrigation management.  Reference evapotranspiration values can be obtained daily from AZMET for the Yuma area and applicable to most of the region in the lower Colorado River Valley.  The ETo values multiplied by an appropriate crop coefficient (K_c) can provide very good estimates on actual crop evapotranspiration (ET_c) rates, ETo * K_c = ET_c.
 
The appropriate K_c values are specific for each crop species and stage of growth.  We commonly use crop coefficient K_cvalues that are provided in the publication “Consumptive Use by Major Crops in the Desert Southwest” by Dr. Leonard Erie and his colleagues, USDA-ARS Conservation Research Report No. 29 (see attached).  Reference information for K_cvalues can be obtained in this publication for common vegetable crops grown in this region.
 
Estimating and tracking actual crop-water use can be a valuable tool in understanding crop-water demand and irrigation management.  Comparing actual crop-water demand and crop irrigation practices can be important in our efforts to understand crop management needs and field-level efficiencies.
 
Reference:
Erie, L.J., O.A French, D.A. Bucks, and K. Harris. 1981. Consumptive Use of Water by Major Crops in the Southwestern United States.  United States Department of Agriculture, Conservation Research Report No. 29.

Viruses vectored by insects 
 
We are on the final section of virus transmission. Virus transmission by insects is one of the most efficient and economically important transmission in agriculture. When you have insects in your crops, not only you are losing your crops because of feeding/chewing by insects, a lot of insects also act as a vector of plant viruses. 
 
Seven out of 29 orders of insect feeding on living green land plants are vectors of plant viruses. 
Insect transmit viruses in 4 distinct modes: 
 

1. Non persistent transmission: The insects can acquire the virus in a matter if seconds/minutes and they are immediately viruliferous. The virus in retained in the stylet of the insect and are transmitted to the next plant the insect feeds on. The virus is retained in the vector only for few minutes and is lost after insect molting. Most viruses transmitted by aphids are non persistent. So when you see few aphids in your melon field and see cucumber mosaic virus symptoms 1-2 weeks later in your field, don’t be surprised. Aphids are efficient vectors, and since viruses are systemic it takes anywhere from few days to 2-3 weeks for the plants to show symptoms. Thus it is very important to manage insects in the field even if you don’t think the ‘pressure’ is not as high. 

Viruses transmitted in non-persistent manner:
 Papaya ringspot virus 
Zucchini yellow mosaic virus 
Watermelon mosaic virus

1. Semi-persistent transmission: The insects can acquire the virus in minutes/hours and there is no latent (incubation) period in the insect. The virus can stay in the insects foregut for hours and is lost after insect molting. Some species of aphids and whiteflies fall in this category.  Example: Cucurbit yellow stunting disorder virus in melons transmitted by whiteflies. 

1. Persistent circulative: Insects have to feed on virus infected plants for hours/days to acquire the virus and the virus has to incubate for hours/days in the insect. After insect can transmit the virus for weeks. Virus can be present in the vectors hemolymph but there is no multiplication of virus in the insect body. Vectors in this transmission includes: Aphids, leafhopper, whiteflies, treehopper. 

Example: Beet curly top virus transmission by beet leafhopper 
 

1. Persistent propagative:  Insects have to feed on virus infected plants for hours/days to acquire the virus and the virus has to incubate for hours/days in the insect. After insect can transmit the virus throughout its lifespan. The virus can multiply in the vector system and often times the virus particles are also passed on to the insect offspring. Tomato spotted wilt virus is transmitted on persistent propagative manner by 9 different species on thrips. 

 

Save the Date : 2024 Plant Pathology Workshop 
When: August 29^th 8AM-12 PM ( breakfast and Lunch provided by Gowan Company and BASF) 
Where: Yuma Ag Center, 6425 W 8^th Street 
What will covered: Plant Pathology program Updates, past season field trial results (we
have some exciting results to share), Q&A to help better Plant pathology program,
Industry panel discussion for all your industry related questions! See you in few weeks! 

Automated thinning machines were first commercialized in 2012, almost a decade ago. Since then, the machines have improved tremendously, and automated thinning has become the standard practice in the Yuma area. As such, I was a bit surprised to see numerous fields this year with sub-optimal thinning performance. Many fields had numerous amounts of excess seedlings that should have been thinned and needed to be removed during the follow-up hand weeding/double removal operation (Fig. 1). There were also some fields where the machine was apparently not readily detecting seedlings, resulting in long sections of plants being killed and a poor final stand (Fig. 2).

Automated thinning machines can and do perform very well when set-up and calibrated correctly. However, field conditions such as lighting, levels of crop residue, weed pressure or soil type (color) change throughout the day and affect the way the machine chooses which plants to selectively thin.

As such, it may be beneficial to establish a protocol where automated thinning machine settings are checked at regular intervals throughout the day to ensure the unit is performing optimally. Doing so may help lower follow-up hand weeding/double removal costs and minimize the number of unnecessary skips in the field.

Fig. 1. Labor crew removing excess lettuce seedlings and weeds after machine thinning.


Fig. 2. Poor final stand establishment following machine thinning, possibly due to incorrect machine calibration.

Preemergence herbicides can be very effective in the low deserts where weeds germinate with every irrigation or rainfall. It is essential, however, that they be at the right place in the soil at the right time. The right place is in the soil around the weed seeds and the right time is when they are germinating. Only fumigants kill seeds. For most other herbicides, the seed must germinate and are then killed. When weed seeds germinate is dependent on a great number of interdependent variables.  These include weed species, soil type, moisture, soil temperature, condition of the seed, depth, organic matter and many other variables. Many seeds have biochemical mechanisms that allow them to germinate at different times. Some may germinate in a few hours and some may not germinate for several years. If they all germinated at the same time, they would be easier to control. The methods used to predict when weed seeds will germinate vary from very sophisticated numeric equations to Farmers Almanac type lore involving things like the thickness of gopher fur, the cuticle thickness of plants or the condition of bird feathers. Some methods will give you a precise day while others will give you just a general idea. In general, as the precision goes up, the accuracy goes down. Regardless of what technique you use, now is the best time to apply preemergence herbicides for the control of annual weeds. It is better to be a month early than a day late.We have conducted trials to determine how long it takes various weed species to germinate after receiving moisture. Results will vary depending on several factors and from field to field and year to year. Results are summarized below for individual species and by month. An average of all species is also included.
   Hours to Germination

NG = No germination

Area wide Insect Trapping Network   VegIPM Update, Vol. 13, No. 15, Jul 13, 2022
Results of pheromone and sticky trap catches can be viewed here.
 THE MOST RECENT RESULTS
Corn earworm:            
CEW moth counts increased slightly in the past 2 weeks and remains higher than the previous 2 summers.
 
Beet armyworm:         
Trap counts stay active in some locations (Yuma Dome Valley and Tacna) but lower than last summer
 
Cabbage looper:          
Cabbage looper numbers remain low consistent with the lack of activity this fall compared to last season.
 
Diamondback moth:      
DBM moths were not caught in any trap in the past 2 weeks; average for this time of the year.
 
Whitefly:                     
Adult movement continuing to increase, particularly in Gila, Yuma and Dome Valleys consistent with melon harvest.
 
Thrips:                         
Thrips adults decreasing in most locations, and trending comparable to previous years.
 
Aphids:                       
Aphid movement is absent consistent with what we typically see in the summer. 
 
Leafminers:                  
Adult activity has highest in Wellton and Dome Valley, and above average for early July.