As reductions of agricultural water allocations in central Arizona from the Colorado River are going into place in 2022 from the Tier 1 of the Drought Contingency Plan provisions, it is important for every segment of the Arizona agricultural industry to continue to review and refine our practices associated with water management and irrigation.  
 
Seasonal conditions are a benefit to vegetable crop production and water management in the desert Southwest, both in terms of cool-season crop adaptability and the general climatic conditions that create lower environmental crop water-use demands.  For example, based on more than 30 years of Arizona Meteorological Network (AZMET) data from the Yuma, Arizona area, approximately 20% of the total annual reference evapotranspiration demand typically occurs between August and May.  
 
Reference evapotranspiration (ETo) is the collective loss of water from a field due to evaporation from the soil surface and transpiration of water vapor from the plants.  Collectively, water movement from the soil and plant systems in a field is referred to as “crop consumptive use” and it is important to understand this process in our efforts to steward our water resources most effectively.
 
The AZMET system provides both historical and real-time weather information that can be used to assist in crop water and irrigation management.  Reference evapotranspiration values can be obtained daily from AZMET for the Yuma area and applicable to most of the region in the lower Colorado River Valley.  The ETo values multiplied by an appropriate crop coefficient (K_c) can provide very good estimates on actual crop evapotranspiration (ET_c) rates, ETo * K_c = ET_c.
 
The appropriate K_c values are specific for each crop species and stage of growth.  We commonly use crop coefficient K_cvalues that are provided in the publication “Consumptive Use by Major Crops in the Desert Southwest” by Dr. Leonard Erie and his colleagues, USDA-ARS Conservation Research Report No. 29 (see attached).  Reference information for K_cvalues can be obtained in this publication for common vegetable crops grown in this region.
 
Estimating and tracking actual crop-water use can be a valuable tool in understanding crop-water demand and irrigation management.  Comparing actual crop-water demand and crop irrigation practices can be important in our efforts to understand crop management needs and field-level efficiencies.
 
Reference:
Erie, L.J., O.A French, D.A. Bucks, and K. Harris. 1981. Consumptive Use of Water by Major Crops in the Southwestern United States.  United States Department of Agriculture, Conservation Research Report No. 29.

This study was conducted at the Yuma Valley Agricultural Center. The soil was a silty clay loam (7-56-37 sand-silt-clay, pH 7.2, O.M. 0.7%). Variety: Deluxe (HMX2595) was seeded, then sprinkler-irrigated to germinate seed on March 20, 2024on 84 inches between bed centers. All other water was supplied by furrow irrigation or rainfall. Treatments were replicated five times in a randomized complete block design. Each replicate plot consisted of 25 ft of bed. Treatment beds were separated by single nontreated beds. Treatments were applied with a tractor-mounted boom sprayer that delivered 50 gal/acre at 100 psi to flat-fan nozzles spaced 12 in apart. 

Spray treatments were done on 05-21-2024, 05-31-2024, 06-07-2024 and 06-14-24. Powdery mildew was first seen on 06-05-24. Please see excel file for additional details.  

Disease severity of powdery mildew (caused by Sphaerotheca fuliginea and S. fusca) severity was determined 6-17-2024 by rating 10 plants within each of the four replicate plots per treatment using the following rating system: 0 = no powdery mildew present; 1 = one to two mildew colonies on leaves  ;2 = powdery mildew present on one quarter of leaves; 3 = powdery mildew present on half of the leaves; 4 = powdery mildew present on more than half of leaf surface area ; 5 = powdery mildew present on entire leaf. These ratings were transformed to percentage of leaves infected values before being statistically analyzed.

The data in the table illustrate the degree of disease control obtained by application of the various treatments in this trial. Most treatments significantly reduced the final severity of powdery mildew compared to nontreated plants. Quintec, Merivon, Tesaris, Luna Sensation, and V6M-5-14 V gave the best disease control. Phytotoxicity symptoms were not noted for any treatments in this trial.

ANR Webinar 10/17 click link for details.

Automated thinning machines were first commercialized in 2012, almost a decade ago. Since then, the machines have improved tremendously, and automated thinning has become the standard practice in the Yuma area. As such, I was a bit surprised to see numerous fields this year with sub-optimal thinning performance. Many fields had numerous amounts of excess seedlings that should have been thinned and needed to be removed during the follow-up hand weeding/double removal operation (Fig. 1). There were also some fields where the machine was apparently not readily detecting seedlings, resulting in long sections of plants being killed and a poor final stand (Fig. 2).

Automated thinning machines can and do perform very well when set-up and calibrated correctly. However, field conditions such as lighting, levels of crop residue, weed pressure or soil type (color) change throughout the day and affect the way the machine chooses which plants to selectively thin.

As such, it may be beneficial to establish a protocol where automated thinning machine settings are checked at regular intervals throughout the day to ensure the unit is performing optimally. Doing so may help lower follow-up hand weeding/double removal costs and minimize the number of unnecessary skips in the field.

Fig. 1. Labor crew removing excess lettuce seedlings and weeds after machine thinning.


Fig. 2. Poor final stand establishment following machine thinning, possibly due to incorrect machine calibration.

Preemergence herbicides can be very effective in the low deserts where weeds germinate with every irrigation or rainfall. It is essential, however, that they be at the right place in the soil at the right time. The right place is in the soil around the weed seeds and the right time is when they are germinating. Only fumigants kill seeds. For most other herbicides, the seed must germinate and are then killed. When weed seeds germinate is dependent on a great number of interdependent variables.  These include weed species, soil type, moisture, soil temperature, condition of the seed, depth, organic matter and many other variables. Many seeds have biochemical mechanisms that allow them to germinate at different times. Some may germinate in a few hours and some may not germinate for several years. If they all germinated at the same time, they would be easier to control. The methods used to predict when weed seeds will germinate vary from very sophisticated numeric equations to Farmers Almanac type lore involving things like the thickness of gopher fur, the cuticle thickness of plants or the condition of bird feathers. Some methods will give you a precise day while others will give you just a general idea. In general, as the precision goes up, the accuracy goes down. Regardless of what technique you use, now is the best time to apply preemergence herbicides for the control of annual weeds. It is better to be a month early than a day late.We have conducted trials to determine how long it takes various weed species to germinate after receiving moisture. Results will vary depending on several factors and from field to field and year to year. Results are summarized below for individual species and by month. An average of all species is also included.
   Hours to Germination

NG = No germination

Results of pheromone and sticky trap catches can be viewed here.

 

Corn earworm: CEW moth counts down in most traps over the last 2 weeks; about average for early October

Beet armyworm: Moth Trap counts increased in several areas last week and appear to remain active in cooler temps, and well above average for early November.

Cabbage looper: Cabbage counts peaked last week in all locations, about average for this time of the season.

Diamondback moth: Adult activity declined in the past 2 weeks ago, Below average for this time of season.

Whitefly:  Adult movement continues with the termination of melon harvests; overall about average for early November.  

Thrips: Thrips adult movement still down, overall activity below average.

Aphids:Winged aphids movement peaked in the north Yuma and Gila Valleys; above average for early November.

Leafminers: Adult activity down in most locations, below average for this time of season.