We will be holding an Invasive Species Workshop at the Yuma Ag Center on July 24 beginning at noon with a yummy lunch, and followed up with speakers from the University of Florida and Georgia who will inform us on a couple of potential invasive insect pests that we should be on the lookout for. It should be very informative meeting. Invasive species are nothing new to the Yuma vegetable industry. In fact, in the past 30 years a number of exotic insect pests have become established in Yuma beginning with the american serpentine leafminer, Liriomyza trifolii . As some may recall, damaging levels of this pest were first found infesting lettuce in 1987. A section 18 was obtained two years later for Agri-Mek and the problem soon subsided. That was followed by the sweet potato whitefly, Bemisia tabaci-biotype B in 1991-1992. Of course, the Section 18 registration of Admire, and subsequent registrations of a variety of new chemistries (IGRs) resulted in area-wide suppression of whitefly populations and since have allowed the industry to effectively manage the pest. Then a few years later (1999) the lettuce aphid showed up in the Yuma Valley, a transplant from Europe, where it had first been found in Salinas the previous year. Along with it came the foxglove aphid which was not previously thought to occur in Arizona. Both aphid species are found sporadically infesting lettuce throughout the area every season. With the registration of Movento (2008) growers can now effectively manage these aphids in leafy vegetables. Finally in the past few years we’ve had two important invasive species invade the desert. The first was a whitefly-transmitted virus, cucurbit yellow stunting disorder virus (CYSDV), on melon crops in 2006, and more recently, the bagrada bug on cole crops in 2010. Both crept into the desert unexpectedly and are causing economic losses to our local vegetable industry. Hopefully, as we continue to learn more about these 2 important pests, cost-effective management programs will be developed. So, I encourage you to attend theInvasive Species Workshop on the 24th and learn about a couple of potential invaders.
This study was conducted at the Yuma Valley Agricultural Center. The soil was a silty clay loam (7-56-37 sand-silt-clay, pH 7.2, O.M. 0.7%). Spinach ‘Revere’ was seeded, then sprinkler-irrigated to germinate seed Jan 18, 2024 on beds with 84 in. between bed centers and containing 30 lines of seed per bed. All irrigation water was supplied by sprinkler irrigation. Treatments were replicated four times in a randomized complete block design. Replicate plots consisted of 15 ft lengths of bed separated by 3 ft lengths of nontreated bed. Treatments were applied with a CO2backpack sprayer that delivered 50 gal/acre at 40 psi to flat-fan nozzles.
Month
Max
Min
Average
Rainfall
January
68
42
54
1.14 in
February
73
47
59
0.50 in
March
77
50
63
0.31 in
Downy mildew (caused by Peronospora farinosa f. sp. spinaciae) was first observed in plots on Feb 19 and final reading was taken on February 26, 2024. Spray date for each treatments are listed in excel file with the results. Disease severity was recorded by determining the percentage of infected leaves present within three 1-ft2 areas within each of the four replicate plots per treatment. The number of spinach leaves in a 1-ft2 area of bed was approximately 144.
The data (found in the accompanying Excel file) illustrate the degree of disease reduction obtained by applications of the various tested fungicides. Products that provided effective control against the disease include Orondis ultra, Thrive 4 M, Fungout, Cevya, Eject and Zampro. No phytotoxicity was observed in any of the treatments in this trial.
Controlling Disease and Weeds with Band-Steam – Yuma Trials Show Good Promise
In previous articles (Vol. 11 (13), Vol. 11 (20), Vol. 11(24)), I’ve discussed using band-steam to control plant diseases and weeds. Band-steaming is where steam is used to heat narrow strips of soil to temperature levels sufficient to kill soilborne pathogens and weed seed (>140 °F for > 20 minutes). The concept is showing good promise. This past season, three trials were conducted examining the efficacy of using steam for disease and weed control in Yuma, AZ. In the studies, steam was applied in a 4-inch-wide by 2-inch-deep band of soil centered on the seedline using a prototype band-steam applicator (Fig.1). The band-steam applicator is principally comprised of a 35 BHP steam generator mounted on top of an elongated bed shaper. The apparatus applies steam via shank injection and from cone shaped ports on top of the bed shaper.
Trial results were very encouraging as the prototype applicator was able to raise soil temperatures to target levels (140°F for >20 minutes) at viable travels speeds of 0.75 mph. Steam provided better than 80% weed control and significantly lowered hand weeding time by more than 2 hours per acre (Table 1). Results also showed that Fusarium colony forming units (CFU) were reduced from 2,600 in the control to 155 in the 0.75 mph and 53 in the 0.5 mph treatments, respectively (a more than 15-fold reduction). A significant difference in Fusarium wilt of lettuce disease incidence was not found, however disease infection at the field site was low (< 2%) and differences were not expected. At 0.5 mph, fuel costs were calculated to be $238/acre which was considered reasonable and consistent with the values reported by Fennimore et al. (2014).
An unexpected finding was that plants in steam treated plots appeared to be healthier and more vigorous than untreated plots (Fig. 2). This trial is still in progress and it will be interesting to see if this improved early growth translates into increases in crop yield.
In summary, early trial results are showing good promise for use of band-steam as a non-herbicidal method of pest control. We plan on conducting further trials in this multi-year study. If you are interested in evaluating the device on your farm and being part of the study please contact me. We are particularly interested in fields with a known history of Fusarium wilt of lettuce and/or Sclerotinia lettuce drop that will be planted to iceberg or romaine lettuce.
As always, if you are interested in seeing the machine operate or would like more information, please feel free to contact me.
Acknowledgements
This work is supported by Crop Protection and Pest Management grant no. 2017-70006-27273/project accession no. 1014065 from the USDA National Institute of Food and Agriculture, the Arizona Specialty Crop Block Grant Program and the Arizona Iceberg Lettuce Research Council. We greatly appreciate their support. Any opinions, findings, conclusions, or recommendations expressed in this publication are those of the author(s) and do not necessarily reflect the view of the U.S. Department of Agriculture.
A special thank you is extended to Mellon Farms for allowing us to conduct this research on their farm.
References
Fennimore, S.A., Martin, F.N., Miller, T.C., Broome, J.C., Dorn, N. and Greene, I. 2014. Evaluation of a mobile steam applicator for soil disinfestation in California strawberry. HortScience 49(12):1542-1549.
Click link below or picture to see the band-steam and co-product applicator in action!
Carryover of Vegetable Herbicides to Wheat Grown in Rotation
Almost all the herbicides used on lettuce, cole crops and melons have restrictions on how soon wheat can be planted in rotation after they have been used. Experience has demonstrated, however, that safe intervals can vary considerably based upon many factors and are almost always much longer than they need to be. The most important factors are rate applied, irrigation practices and tillage. For example, when Kerb used to be banded at 2 to 4 lbs. per acre after planting and incorporated with furrow irrigation, it was common to see treated strips across wheat fields which followed. This is uncommon now that lower rates are Chemigated. We still see some Balan injury at ends of fields or in overlaps especially when sudan is planted. Wheat it not very sensitive to Prefar and carryover injury is uncommon.
Corn earworm:
CEW moth counts continued to decline over the past 2 weeks across all locations and about average for this time of the season.
Beet armyworm:
Trap counts decreased in most locations, but well below average for late-October. Most activity in Yuma, dome and Gila Valleys.
Cabbage looper:
Cabbage looper trap counts declined in most areas but increased in the Bard and Yuma Valley. Activity below average for early November.
Diamondback moth:
Adults peaked in Gila and Yuma Valleys and above average in all locations for this time of year. Traps located adjacent to cauliflower and broccoli transplants had the highest trap captures
Whitefly:
Adults remains active in Dome Valley, Wellton, and Roll consistent with melon crops completing harvest, but below average movement for this time of season.
Thrips:
Thrips adult movement increased in most locations last week, particularly in Dome Valley, Wellton, and Tacna. Activity about average for early November.
Aphids:
Aphid movement increased sharply in Bard, N. Yuma Valley and N. Gila Valleys over the past 2 weeks. Activity average for this time of year.
Leafminers:
Adult activity increased sharply in the Gila Valley, Roll and Wellton; about average for this time of season.
To contact John Palumbo go to: jpalumbo@ag.Arizona.edu
