Seems that insect pests in fall produce crops are like a box of chocolates, you never know what you’re going to get. And this year is particularly interesting. Whitefly pressure has been the lightest I’ve seen in several years. There are exceptions, particularly in areas near alfalfa and where cotton is still being defoliated. Bagrada bug has also been very light this fall, although we are now beginning to pick up a fair number in broccoli plots at the Yuma Ag Center (YAC). Not sure why the numbers are lighter this year, and why they are just now beginning to show up in numbers. I have had reports that they are also showing up in a few areas in Coachella Valley. On the flip side, flea beetle activity has been very heavy this fall and populations remain very active in some locations. At YAC, flea beetle activity remains heavy and can be found on all lettuce and cole crops of all sizes. Worm activity has been erratic this fall, but there are plenty of them around. Beet armyworm pressure was very heavy about 3 weeks ago, subsided a bit last week, and now are coming on heavy again. Egg masses can readily be found on lettuce and broccoli. Perhaps most surprising has been the unusually heavy cabbage looper pressure the past few weeks. We’re averaging 3-4 larvae /plant in many of our efficacy trials, and egg lays remain steady. Have also had reports of diamondback moth on transplants in some areas. We can only find them on low numbers on direct-seeded broccoli. The good news is that our trap counts show that corn earworm moth activity is very low -but definitely don’t forget about them as the head lettuce begins to fold in. With the warm weather expected to continue for the next week or so, I would not anticipate the worm pressure to let up much. Thrips have also been unusually active so far this fall, showing up a few earlier than normal. At the YAC, we’re picking up quite a few bean thrips (see image below) adults. The adults are heavily scarring up the plants, but can be controlled with Radiant and Lannate. It seems like they dispersed into the Yuma Valley following that low pressure system that moved through the area last week. Finally, we’ve been picking up winged-aphids in our trapping network for the past 3 weeks, a bit earlier than normal. I have observed winged cabbage aphid and cowpea aphids on lettuce, and although we’ve yet to find any green peach aphid winged adults, I observed this week a few green peach aphid nymphs colonizing broccoli at YAC. Given that cool weather and windy weather we experienced recently, this is not surprising. Crops treated with imidacloprid should prevent significant colonization on younger crops. But keep your eyes open for aphids on older cole crops, particularly where the imidacloprid residual may be declining.
This study was conducted at the Yuma Valley Agricultural Center. The soil was a silty clay loam (7-56-37 sand-silt-clay, pH 7.2, O.M. 0.7%). Lettuce was seeded, then sprinkler-irrigated to germinate seed on Nov 28, 2023 on double rows 12 in. apart on beds with 42 in. between bed centers. All other water was supplied by furrow irrigation or rainfall. Treatments were replicated five times in a randomized complete block design. Each replicate plot consisted of 25 ft of bed, which contained two 25 ft rows of lettuce. Plants were thinned Jan 4, 2024 at the 3-4 leaf stage to a 12-inch spacing. Treatment beds were separated by single nontreated beds. Treatments were applied with a tractor-mounted boom sprayer that delivered 50 gal/acre at 100 psi to flat-fan nozzles spaced 12 in apart.
Month
MaxTemp(°F)
Min Temp (°F)
Average Temp (°F)
Rainfall
November
80
51
65
0.08 in
December
71
44
57
0.82 in
January
68
42
54
1.14 in
February
73
47
59
0.50 in
Downy mildew (caused by Bremia lactucae) rating was done on variety Eblin, Bobcat, and 180 (partially funded by AILRC grant). Disease was first seen on 1-30-24. Please see attached excel file for chemicals application date. Disease rating was done on February 29, 2024. Disease severity was determined by rating 10 plants within each of the five replicate plots per treatment using the following rating system: 0 = no downy mildew present; 0.5 = one to a few very small downy mildew colonies on bottom leaves; 1 = downy mildew present on bottom leaves of plant; 2 = downy mildew present on bottom leaves and lower wrapper leaves; 3 = downy mildew present on bottom leaves and all wrapper leaves; 4 = downy mildew present on bottom leaves, wrapper leaves, and cap leaf; 5 = downy mildew present on entire plant.
The data in the table illustrate the degree of disease control obtained by application of the various treatments in this trial. Most of the treatments exhibited activity against the disease to some extent. Latitude, Amara, Eject, Previcure flex exhibited good control in the variety Eblin (highly susceptible variety). Whereas Cevya, Stargus, Latitude, Amara, Revus, Thrive 4 M, Actigard, Instigo+Carbose+intereact showed activity against the pathogen in variety Bobcat. Please see excel file for the full list of chemicals and their efficacy. The lettuce variety 180 was resistant to the disease and no downy mildew was observed on the particular variety. No phytotoxicity was observed in this field.
Band-Steam Applicator for Controlling Soilborne Pathogens and Weeds in Lettuce
Steam sterilization of soils is commonly used in plant nurseries and greenhouses for effective control of soilborne pathogens and weed seeds. The technique, however, is highly energy intensive as the entire soil profile is heated. This is too costly and slow to be practical for field scale vegetable production. To reduce energy consumption and cost, use of band-steaming, where steam is applied only in the area where it is needed – in the plant root zone, is proposed. In this method, narrow strips of soil centered on the seed line are treated with steam rather than the whole bed.
Over the course of the last year, we developed a prototype band-steam and co-product applicator that is designed to raise soil temperatures in a band 2” deep by 4” wide to levels sufficient to control soilborne pathogens (140 °F for > 20 minutes) and weed seed (150 °F for > 20 minutes). The device is principally comprised of a 35 BHP steam generator and a co-product applicator mounted on top of a bed shaper (Fig.1). The apparatus applies steam via shank injection and from cone shaped ports on top of the bed shaper. An exothermic compound can be co-applied via shank injection and/or a banding spray nozzle. The rationale behind co-applying an exothermic compound with steam is that exothermic compounds react and release heat when combined with water, thereby reducing energy requirements and increasing travel speed.
Preliminary testing of the device this spring in Yuma, AZ were very promising. Trial results showed that application of steam alone effectively raised soil temperature in the center of the seed line to levels required for effective pest control (140 °F for more than 20 minutes). Use of the exothermic compound increased soil temperature by about 10 °F. A video of the device in action can be found at the link provided below.
We are currently evaluating the device in field trials with lettuce in Salinas, CA. Target pests in these experiments conducted in collaboration with Steve Fennimore, UC Davis, are soil pathogens which cause Sclerotinia lettuce drop and in-row weeds. Future articles will report the findings of this research.
This fall, we will be replicating these tests in Yuma, AZ and also investigating the effectiveness of band-steam for controlling Fusarium oxysporum f. sp. lactucae which causes Fusarium wilt of lettuce. Heat has been shown to effectively kill Fusarium oxysporum spores and control Fusarium wilt disease. As an example, soil solarization, where clear plastic is placed over crop beds during the summer, raises soil temperatures to 150-155˚F at the soil surface, effectively killing the pathogen and reducing disease incidence by 45-98% (Matheron and Porchas, 2010).
These projects are sponsored by USDA-NIFA, the Arizona Specialty Crop Block Grant Program and the Arizona Iceberg Lettuce Research Council. We greatly appreciate their support.
If you are interested in seeing the machine operate or would like more information, please feel free to contact me.
See the band-steam and co-product applicator in action!
References:
Matheron, M. E., & Porchas, M. 2010. Evaluation of soil solarization and flooding as management tools for Fusarium wilt of lettuce. Plant Dis. 94:1323-1328.
Sprangletop has become increasingly widespread in Arizona mostly because of its growth habits and tolerance to many commonly used herbicides. It is in the Leptochloa genus which is derived from the Greek words leptos (thin) and chloa (grass). There are more than 150 species of sprangletop worldwide but only three in Arizona and two in Yuma County. The two that are the most common in the low desert are Mexican Sprangletop, which is Leptochloa uninervia and Red Sprangletop, Leptochloa filiformis. A third species, Bearded Sprangletop, Leptochloa fascicularis, is more common at higher elevations of 1500 feet or higher. It is not uncommon to find both Red and Mexican Sprangletop in the same field and it is not hard to distinguish them when they are side by side. Red Sprangletop has a light green leaf blade which is similar in width to watergrass and barnyardgrass. It has very fine hairs and very small and fine branches and spiklets. It also has a long membranous ligule. The name Red refers to the leaf sheath, which is characteristically red, rather than the seed head. Mexican Sprangletop has a thinner leaf blade which is darker green or grayish in color and similar in appearance to common bermudagrass. The seed head is distinctly coarser than that of Red Sprangletop. Side by side, leaf color and size of the seed make it easy to distinguish these two. Both of these grasses are classified as summer annuals, but they grow more like perennials in the low desert. Sprangletop does very well in the hottest part of the summer and typically germinates from seed during the hottest period between July and September. Once established, however, it often survives through the cold winter months. It grows into clumps that often appear to be dead during the winter. New shoots commonly grow from these established crowns the next season. When this occurs, preemergent herbicides such as Trifluralin or Prowl are ineffective. Some Sprangletop plants stay green and grow through the winter. Many of the postemergence, grass specific herbicides that control many grasses are ineffective on Sprangletop. This also has contributed to the spread of these weeds. Sethoxydim (Poast) and Fluazifop (Fusilade) do not control either Red or Mexican sprangletop. Only Clethodim (Select Max, Select, Arrow and others) is the only one of these grass herbicides that is effective and only at the highest labeled rates. Two applications are often necessary to achieve season long control.
Results of pheromone and sticky trap catches can be viewedhere.
Corn earworm:
CEW moth counts decreased slightly after a above average peak in activity for September; particularly active in Wellton and Roll.
Beet armyworm:
Trap counts decreased slightly in most locations, but well below average for September. Most activity in Wellton and Yuma Valley.
Cabbage looper:
Cabbage looper trap counts down in all locations but remain quite active Wellton. Activity normal compared to previous years.
Whitefly:
Adult movement increasing Dome Valley, but down in most other locations; movement is below average for this time of year.
Thrips:
Thrips adult movement increased slightly in some locations, particularly in Wellton and Tacna, but remains below average for mid-September.
Aphids:
Aphid movement has been absent since early June typical with high summer temperatures, and the monsoon flow. Expect activity to begin with N and NW winds.
Leafminers:
Adult activity remains decreased in mostr location and remains low; below average for this time of season.
Diamondback moth:
Beginning to pick up a few moths in Dome Valley and Gila Valley; below average for September so far.