Historically, our Areawide Pheromone and Sticky Trap monitoring for insects was terminated around the first of April as the produce season ended. Beginning 4 years ago however, we continued our Areawide Trapping Network throughout the summer to collect trapping data from all 15 areawide trap locations year-round. So why is this additional trapping data useful? For several reasons:
1) Understanding the activity of some of our key pests when produce is not grown during the summer may give us an indication of what to expect as the fall produce season begins. This may be particularly helpful for predicting moth flights and whitefly flights in August-September coinciding with early transplanting and direct seeded crops. Another example is keeping track of corn earworm which can unexpectedly show up near the beginning of fall harvests.
2) Trapping for pests during the summer has shown us that 2 of our more important produce pests are not caught in traps during the summer. We presume this is due to the absence of brassica crops and weeds for diamondback moth, and high daytime/nighttime temperatures lethal to aphids. The fact that trap catches resume in the fall supports our conclusion that these pests are absent in the summer, only to reenter the desert via winds and/or transplants in the fall. And finally,
3) It gives me something to do in the summer other than write reports and papers.
So, visit the Areawide Summer Trap Network if you’re curious what our key pests are up to.
Bacterial leaf spot is caused by the bacterium, Pseudomonas syringae pv. Aptata. Hosts of the pathogen include Table beet, Sugar beet, Spinach, Swiss chard, Snap bean, Dry bean, Cantaloupe, Pumpkin, Squash, Lettuce, and Pepper.
Significance
Bacterial leaf spot is most commonly found affecting table beet at early stages of growth. This may be because younger plants are more susceptible. It may also be related to the prevalence of cool, wet conditions at the beginning of the cropping season. These conditions are most conducive to infection and disease development. The disease may affect green leaf area in developing seedlings and in severe cases can lead to plant death. Diseased leaves will lead to weakened seedlings which may affect transplant success. Bacterial leaf spot does not directly affect root quality.
Figure 1. Bacterial leaf spot caused by Pseudomonas syringae pv. aptata of
table beet: (left) Small focus of the disease, and (right) 2-6 true leaf stage of
plants affected by the epidemic.
Symptoms
Bacterial leaf spot symptoms are irregular in shape and black to brown in color. The spots may occur across the leaf surface but have a tendency to occur on the leaf edges. Lesions are water-soaked not often accompanied by chlorosis (yellowing). Lesions may initially be small (up to ¼ inch in diameter) but if conditions are conducive may rapidly expand and coalesce but do not cross major veins. The leaf is usually puckered and deformed around the lesions, especially if they occur on the margins (Fig. 2). When the disease is severe, the affected the tissue may also tear giving the appearance of abiotic damage such as hail.
Figure 2. Symptoms of bacterial leaf spot on table beet (cv. Merlin). Note the
black color of the lesions and puckering and deformation of the leaves around
the symptoms.
Bacterial leaf spot symptoms may be confused with other fungal foliar diseases (e.g. Cercospora and Phoma leaf spots; see complementary fact sheets for these diseases) and insect damage (e.g. thrips). Bacterial leaf spot lesions do not have black pin-head, fungal structures across the lesions as found in Cercospora leaf spot. Phoma leaf spot lesions also have small, black structures within the lesions but found in rings and usually accompanied by an ooze of spores.
Disease Cycle
Figure 3. Schematic diagram of the potential sources of Pseudomonas syringae pv. aptata inoculum which may contribute to Bacterial leaf spot epidemics in table beet. P. syringae pv. aptata may be introduced to the table beet crop through several ways (Fig. 3). P. syringae pv. aptata is seedborne and infested seed is a common means of pathogen introduction into table beet fields. The pathogen can also be present in the infested crop residues from the previous season as well as the alternative hosts. Alternative crop hosts include typical Chenopods (e.g. spinach, sugar beet, and Swiss chard) but also other non-related species including beans, cucurbits, and lettuce. Cool temperatures between 45-60°F and wet conditions typical of those that occur in early spring in upstate New York are conducive for pathogen infection and disease development. These conditions are similar to those that predispose table beet also to Phoma leaf spot. The pathogen can spread within the field through infested seed and irrigation water.
Disease Management
One of the most critical factors to achieve management of bacterial leaf spot is the use of certified seeds (Fig. 4). Other factors that will also contribute to reducing the initial inoculum and hence risk of disease include: (i) tillage to bury plant residues to promote breakdown, (ii) rotation between host crop species of at least three years; and (iii) drip or furrow irrigation to avoid dispersal of the pathogen through water splash. Currently, little is known of differences in cultivar susceptibility to bacterial leaf spot. Anectodal reports have described severe epidemics in cvs. Merlin, Boro, and Pablo.
Figure 4. Complementary practices towards the management of Bacterial leaf spot of table beet. In-season control. If bacterial leaf spot is severe, applications of copper-based products should be considered to prevent disease spread. There are a range of conventional and OMRI-listed copper-based products available, including: Cueva (copper octanoate; FRAC M1), Badge X2 (copper oxychloride + copper hydroxide; FRAC M1), and Kocide 3000-O (copper hydroxide; FRAC M1). Remember to check the label for rates, re-entry intervals, and pre-harvest intervals applicable to your state and crop. Avoid applying copper-based products on transplants before hardening off, and in high temperatures due to the risk of phytotoxicity.
Band-Steam Applicator for Controlling Soilborne Pathogens and Weeds in Lettuce
Steam sterilization of soils is commonly used in plant nurseries and greenhouses for effective control of soilborne pathogens and weed seeds. The technique, however, is highly energy intensive as the entire soil profile is heated. This is too costly and slow to be practical for field scale vegetable production. To reduce energy consumption and cost, use of band-steaming, where steam is applied only in the area where it is needed – in the plant root zone, is proposed. In this method, narrow strips of soil centered on the seed line are treated with steam rather than the whole bed.
Over the course of the last year, we developed a prototype band-steam and co-product applicator that is designed to raise soil temperatures in a band 2” deep by 4” wide to levels sufficient to control soilborne pathogens (140 °F for > 20 minutes) and weed seed (150 °F for > 20 minutes). The device is principally comprised of a 35 BHP steam generator and a co-product applicator mounted on top of a bed shaper (Fig.1). The apparatus applies steam via shank injection and from cone shaped ports on top of the bed shaper. An exothermic compound can be co-applied via shank injection and/or a banding spray nozzle. The rationale behind co-applying an exothermic compound with steam is that exothermic compounds react and release heat when combined with water, thereby reducing energy requirements and increasing travel speed.
Preliminary testing of the device this spring in Yuma, AZ were very promising. Trial results showed that application of steam alone effectively raised soil temperature in the center of the seed line to levels required for effective pest control (140 °F for more than 20 minutes). Use of the exothermic compound increased soil temperature by about 10 °F. A video of the device in action can be found at the link provided below.
We are currently evaluating the device in field trials with lettuce in Salinas, CA. Target pests in these experiments conducted in collaboration with Steve Fennimore, UC Davis, are soil pathogens which cause Sclerotinia lettuce drop and in-row weeds. Future articles will report the findings of this research.
This fall, we will be replicating these tests in Yuma, AZ and also investigating the effectiveness of band-steam for controlling Fusarium oxysporum f. sp. lactucae which causes Fusarium wilt of lettuce. Heat has been shown to effectively kill Fusarium oxysporum spores and control Fusarium wilt disease. As an example, soil solarization, where clear plastic is placed over crop beds during the summer, raises soil temperatures to 150-155˚F at the soil surface, effectively killing the pathogen and reducing disease incidence by 45-98% (Matheron and Porchas, 2010).
These projects are sponsored by USDA-NIFA, the Arizona Specialty Crop Block Grant Program and the Arizona Iceberg Lettuce Research Council. We greatly appreciate their support.
If you are interested in seeing the machine operate or would like more information, please feel free to contact me.
See the band-steam and co-product applicator in action!
References:
Matheron, M. E., & Porchas, M. 2010. Evaluation of soil solarization and flooding as management tools for Fusarium wilt of lettuce. Plant Dis. 94:1323-1328.
Sprangletop has become increasingly widespread in Arizona mostly because of its growth habits and tolerance to many commonly used herbicides. It is in the Leptochloa genus which is derived from the Greek words leptos (thin) and chloa (grass). There are more than 150 species of sprangletop worldwide but only three in Arizona and two in Yuma County. The two that are the most common in the low desert are Mexican Sprangletop, which is Leptochloa uninervia and Red Sprangletop, Leptochloa filiformis. A third species, Bearded Sprangletop, Leptochloa fascicularis, is more common at higher elevations of 1500 feet or higher. It is not uncommon to find both Red and Mexican Sprangletop in the same field and it is not hard to distinguish them when they are side by side. Red Sprangletop has a light green leaf blade which is similar in width to watergrass and barnyardgrass. It has very fine hairs and very small and fine branches and spiklets. It also has a long membranous ligule. The name Red refers to the leaf sheath, which is characteristically red, rather than the seed head. Mexican Sprangletop has a thinner leaf blade which is darker green or grayish in color and similar in appearance to common bermudagrass. The seed head is distinctly coarser than that of Red Sprangletop. Side by side, leaf color and size of the seed make it easy to distinguish these two. Both of these grasses are classified as summer annuals, but they grow more like perennials in the low desert. Sprangletop does very well in the hottest part of the summer and typically germinates from seed during the hottest period between July and September. Once established, however, it often survives through the cold winter months. It grows into clumps that often appear to be dead during the winter. New shoots commonly grow from these established crowns the next season. When this occurs, preemergent herbicides such as Trifluralin or Prowl are ineffective. Some Sprangletop plants stay green and grow through the winter. Many of the postemergence, grass specific herbicides that control many grasses are ineffective on Sprangletop. This also has contributed to the spread of these weeds. Sethoxydim (Poast) and Fluazifop (Fusilade) do not control either Red or Mexican sprangletop. Only Clethodim (Select Max, Select, Arrow and others) is the only one of these grass herbicides that is effective and only at the highest labeled rates. Two applications are often necessary to achieve season long control.
Corn earworm:
CEW moth increased the Dome Valley area last week, but areawide below average for early October.
Beet armyworm:
Trap counts highest in Tacan, Wellton and Dome, but below average for early fall.
Cabbage looper:
Cabbage looper numbers remained low consistent with late-September.
Diamondback moth:
DBM moths beginning to appear in traps in Wellton/Dome Valley, trending on average for early fall..
Whitefly:
Adult movement down in the past week, above average for late-September.
Thrips:
Thrips adult activity beginning to increase, and trending about average to previous years.
Aphids:
First winged adults captured for the season, consistent with heavy winds from W-NW last week. Can anticipate aphid flights to increase in the coming weeks.
Leafminers:
Adult activity tending downward in most locations, average for late-September.