Using Insecticides to Control Whiteflies in Spring Melons 2015
In our last update we discussed whitefly management, but now that daytime temperatures are forecasted to be in the 90’s for the next 10 days, I thought that it would be good to review your insecticide options for whitefly management. Several factors play a role in determining which insecticide(s) you may want to apply. If the grower applied a neonicotinoid at planting (e.g., imidacloprid) the soil residual is likely long gone and it is likely no longer providing control of nymphs and newly-emerging adults. Thus, if whitefly population abundance is sufficiently high enough to justify control, a foliar insecticide is recommended. When nymphs can easily be found on the crown and mid-vine leaves, an IGR or IGR-like product is recommended. This would include: Vetica, Courier, Oberon, and Knack. None of these products will provide good adult knockdown, but if applied correctly, will eventually suppress adult populations by preventing the development of the nymphs within the field. Experience has shown that these products can provide 14-21 days of residual control of nymphs. Control of adults infesting plants from outside sources will require a different approach. A Vydate or Lannate combined with a bifenthrin or Danitol tank-mixture is an option, but will likely only provide adult knockdown, with limited residual control (3-5 d). Among the neonicotinoids, Assail and Venom/Scorpion have shown the most consistent residual adult control (7-10 d) in experimental trials and will also provide decent control of nymphs on treated leaves. Because neonicotinoids are used on many crops grown throughout the year be sure to consider resistance management statements on the label as well as the UA Cross-commodity Guidelines before you apply them. A newer mode of action, Exirel (anthrillic diamide) can provide knockdown and residual control (14 d) of both adults and nymphs following foliar application. Because Exirel works via translmaniar movement in treated leaf tissue, good spray deposition on all melon foliage is important for maximizing control of both adults and nymphs. This brings up another factor that is important to consider – presence of pollinators in or near the field. Be sure to check the label carefully for the Environmental Hazards statement, specifically for language and restrictions on honey bee safety. In some cases, products can be used effectively and safely through application timing and rates, whereas in other cases, some products should not be used when plants are flowering and pollinators are actively working fields. You must read the label carefully. The proximity to harvest may limit your choices as well. The PHIs for whitefly products vary anywhere from 0-7 days. Also, the presence of worms near harvest may influence your choice of products. If you’re using a whitefly specific product (e.g., Courier, Oberon, Knack, Assail, Venom/Scorpion) you might consider adding a pyrethroid for cabbage looper control, or a Lep material (e.g., Radiant, Intrepid, Coragen, Belt) for control of both looper and beet armyworm. Products such as Vetica and Exirel are efficacious against both whiteflies and Lep species. Visit these publications for information on products available for Whitefly Control on Desert melons and Lepidopterous Larvae Control on Desert Melons.
In our last update we discussed whitefly management, but now that daytime temperatures are forecasted to be in the 90’s for the next 10 days, I thought that it would be good to review your insecticide options for whitefly management. Several factors play a role in determining which insecticide(s) you may want to apply. If the grower applied a neonicotinoid at planting (e.g., imidacloprid) the soil residual is likely long gone and it is likely no longer providing control of nymphs and newly-emerging adults. Thus, if whitefly population abundance is sufficiently high enough to justify control, a foliar insecticide is recommended. When nymphs can easily be found on the crown and mid-vine leaves, an IGR or IGR-like product is recommended. This would include: Vetica, Courier, Oberon, and Knack. None of these products will provide good adult knockdown, but if applied correctly, will eventually suppress adult populations by preventing the development of the nymphs within the field. Experience has shown that these products can provide 14-21 days of residual control of nymphs. Control of adults infesting plants from outside sources will require a different approach. A Vydate or Lannate combined with a bifenthrin or Danitol tank-mixture is an option, but will likely only provide adult knockdown, with limited residual control (3-5 d). Among the neonicotinoids, Assail and
We are on the final section of virus transmission. Virus transmission by insects is one of the most efficient and economically important transmission in agriculture. When you have insects in your crops, not only you are losing your crops because of feeding/chewing by insects, a lot of insects also act as a vector of plant viruses.
Seven out of 29 orders of insect feeding on living green land plants are vectors of plant viruses.
Insect transmit viruses in 4 distinct modes:
Non persistent transmission: The insects can acquire the virus in a matter if seconds/minutes and they are immediately viruliferous. The virus in retained in the stylet of the insect and are transmitted to the next plant the insect feeds on. The virus is retained in the vector only for few minutes and is lost after insect molting. Most viruses transmitted by aphids are non persistent. So when you see few aphids in your melon field and see cucumber mosaic virus symptoms 1-2 weeks later in your field, don’t be surprised. Aphids are efficient vectors, and since viruses are systemic it takes anywhere from few days to 2-3 weeks for the plants to show symptoms. Thus it is very important to manage insects in the field even if you don’t think the ‘pressure’ is not as high.
Semi-persistent transmission: The insects can acquire the virus in minutes/hours and there is no latent (incubation) period in the insect. The virus can stay in the insects foregut for hours and is lost after insect molting. Some species of aphids and whiteflies fall in this category. Example: Cucurbit yellow stunting disorder virus in melons transmitted by whiteflies.
Persistent circulative: Insects have to feed on virus infected plants for hours/days to acquire the virus and the virus has to incubate for hours/days in the insect. After insect can transmit the virus for weeks. Virus can be present in the vectors hemolymph but there is no multiplication of virus in the insect body. Vectors in this transmission includes: Aphids, leafhopper, whiteflies, treehopper.
Example: Beet curly top virus transmission by beet leafhopper
Persistent propagative: Insects have to feed on virus infected plants for hours/days to acquire the virus and the virus has to incubate for hours/days in the insect. After insect can transmit the virus throughout its lifespan. The virus can multiply in the vector system and often times the virus particles are also passed on to the insect offspring. Tomato spotted wilt virus is transmitted on persistent propagative manner by 9 different species on thrips.
Save the Date : 2024 Plant Pathology Workshop
When: August 29th 8AM-12 PM ( breakfast and Lunch provided by Gowan Company and BASF)
Where: Yuma Ag Center, 6425 W 8th Street
What will covered: Plant Pathology program Updates, past season field trial results (we
have some exciting results to share), Q&A to help better Plant pathology program,
Industry panel discussion for all your industry related questions! See you in few weeks!
Controlling Fusarium Wilt of Lettuce Using Steam Heat – Trial Initiated
Earlier this week, we initiated a trial examining the use of band steam for controlling Fusarium wilt of lettuce. The premise behind this research is to use steam heat to raise soil temperatures to levels sufficient to kill soilborne pathogens. For Fusarium oxysporum f. sp. lactucae, the pathogen which causes Fusarium wilt of lettuce, the required temperature for control is generally taken to be > 140°F for 20 minutes. Soil solarization, where clear plastic is placed over the crop bed during the summer, exploits this concept. The technique raises soil surface temperatures to 150-155˚F, effectively killing the pathogen and reducing disease incidence by 45-98% (Matheron and Porchas, 2010).
In our trials, we are using steam heat to raise soil temperatures. Steam is delivered by a 35 BHP steam generator mounted on a custom designed elongated bed shaper (Fig. 1). Preliminary results were encouraging. The device was able to increase the temperature of the top 3” of soil to over 180°F at a travel speed of 0.5 mph as shown in this video of the machine in action (shown below). These temperatures exceed that of those known to control pathogens responsible for causing Fusarium wilt of lettuce (> 140°F for 20 minutes).
Stay tuned for final trial results and reports on the efficacy of using steam heat to control Fusarium wilt of lettuce.
If you are interested in evaluating the technique on your farm, please contact me. We are seeking additional sites with a known history of Fusarium wilt of lettuce disease incidence to test the efficacy and performance of the device.
References
Matheron, M. E., & Porchas, M. 2010. Evaluation of soil solarization and flooding as management tools for Fusarium wilt of lettuce. Plant Dis. 94:1323-1328.
Acknowledgements
This project is sponsored by USDA-NIFA, the Arizona Specialty Crop Block Grant Program and the Arizona Iceberg Lettuce Research Council. We greatly appreciate their support.
A special thank you is extended to Cory Mellon and Mellon Farms for allowing us to conduct this research on their farm.
Weeds are one of the most visible of all agricultural pests. They can’t move or hide and once established often stick up over the crop. Just one weed in a 10 acre field is annoying to look at. With insects and diseases, the damage is often more visible than the pest. That is not the case with weeds. A moderate weed infestation is approximately 10 weeds per square foot. If a herbicide produces 90% control, that leaves 1 weed per square foot or 43 weeds per acre. Without an untreated check, this can look like the herbicide failed! It is easy to leave an untreated spot in a field and it is well worth doing. Many applicators do so unintentionally because of skips, powerlines and other causes. They help determine crop injury and weed control. Here are some examples of what various levels of control looked like from one of our cole crop trials:
Corn earworm:
CEW moth counts remain low across all locations; average for this time of the season.
Beet armyworm:
Trap counts decreased in all locations, and a little below average for late-January.
Cabbage looper:
Cabbage looper trap counts remained low in all locations; below average for January.
Diamondback moth:
Adult activity decreased across all locations, except the North Gila Valley where trap is adjacent to with nearby brassica seed crops. Overall, activity is a little below for this time of year.
Whitefly:
Adult movement remained low in all locations consistent with previous seasons.
Thrips:
Thrips adult movement beginning to increase slightly in most locations last week but increased sharply in Roll. Activity about average for January.
Aphids:
Aphid movement low in most locations, increased slightly in N. Yuma and E. Gila Valleys. Trap captures slightly below average for this time of season.
Leafminers:
Adult activity increased in many areas, particularly in the Yuma Valley; above average for this time of season.
To contact John Palumbo go to: jpalumbo@ag.Arizona.edu
