May 5, 2021Summer Sanitation Is Important as Ever
To contact John Palumbo go to: jpalumbo@ag.Arizona.edu
Clovers can be very difficult to control weeds here, but it is also a major crop and common ornamental. Clovers can survive under poor growing conditions and are not controlled with glyphosate and seem to get worse every year. There are more than 50 types and 300 species of clover and they can be easily misidentified. They are all in the legume (Fabracea) family and can use a bacterium (rhizobium) in the soil to convert nitrogen in the atmosphere to a form that they and other plants can use for fertilizer. There are only 4 or 5 clover species that are agricultural pests here. The ones we get the most questions on are white and yellow sweet clover. These are in the Melilotus family. White sweet clover (Melilotus albus) is tall for a clover and can get 3 to 5 foot in height. The leaves are thinner than most clovers and this difficult to control weed lives at least 2 years and sometimes longer. Glyphosate and most of the contact herbicides do not control it. The plant growth regulator herbicides work best. Yellow sweet clover (Melilotus officinalis) is less common here. The flowers are yellow, and it is not as tall and vegetative as white sweet clover. Yellow is more common at higher elevations. California burclover (Medicago polymorpha) and Black medic (Medicago lupina) are in the same genus as alfalfa and are more of a problem in landscapes, parks and golf courses than in agricultural fields here. They do not grow upright and spread below the crop or turf. The true clovers are in the Trifolium genus and include white and strawberry clover. These creep along the ground and root at the nodes of the stem. These are more of a urban landscape weed and not considered an agricultural problem. Creeping woodsorrel or Oxyalis looks like a clover but it is not related. It is a turf weed that spreads rapidly along the ground and can live for several years. Preemergent herbicides are effective against all these clovers before they become established. The postemergence herbicides that are most effective in controlling these clovers are the plant growth regulators. Contact herbicides and glyphosate are generally ineffective.
Bindu Poudel, Martin Porchas, and Rebecca Ramirez
Yuma Agricultural Center, University of Arizona, Yuma, AZ
This study was conducted at the Yuma Valley Agricultural Center. The soil was a silty clay loam (7-56-37 sand-silt-clay, pH 7.2, O.M. 0.7%). Lettuce ‘Magosa’ was seeded, then sprinkler-irrigated to germinate seed on Nov 19, 2019 on double rows 12 in. apart on beds with 42 in. between bed centers. All other water was supplied by furrow irrigation or rainfall. Treatments were replicated four times in a randomized complete block design. Each replicate plot consisted of 25 ft of bed, which contained two 25 ft rows of lettuce. Plants were thinned Jan 6, 2020 at the 3-4 leaf stage to a 12-inch spacing. Treatment beds were separated by single nontreated beds. Treatments were applied with a tractor-mounted boom sprayer that delivered 50 gal/acre at 100 psi to flat-fan nozzles spaced 12 in apart.
Powdery mildew (caused by Golovinomyces cichoracearum) was first observed in plots on Feb 12, and disease rating was done on March 10, 2020. Foliar applications of treatments were made Jan 7, Feb 7, 19, and 26, 2020 (see table).
Disease severity was determined by rating 10 plants within each of the four replicate plots per treatment using the following rating system: 0 = no powdery mildew present; 0.5 = one to a few very small powdery mildew colonies on bottom leaves; 1 = powdery mildew present on bottom leaves of plant; 2 = powdery mildew present on bottom leaves and lower wrapper leaves; 3 = powdery mildew present on bottom leaves and all wrapper leaves; 4 = powdery mildew present on bottom leaves, wrapper leaves, and cap leaf; 5 = powdery mildew present on entire plant. These ratings were transformed to percentage of leaves infected values before being statistically analyzed. Yield loss due to rejected lettuce heads would likely begin to occur on plants with a powdery mildew rating above 2.0 (percentage of leaves infected value of 40).
The data in the table illustrate the degree of disease control obtained by application of the various treatments in this trial. All treatments significantly reduced the final severity of powdery mildew compared to nontreated plants. The most effective fungicides, that held the percentage of leaves that were infected to 20% or less, included Merivon, experimental compound UA1, Luna sensation, Rally, Fontellis, and Quintec in comparison, the percentage of infected leaves in non-treated plots was 82%. Phytotoxicity symptoms were not noted for any treatments in this trial.
Mark C. Siemens
Vol. 12, Issue 9, Published 5/5/2021
Automated thinning machines have been commercially available since 2012. These machines identify crop plants and intermittently deliver an herbicidal spray or dose of liquid fertilizer to thin the stand to the desired plant spacing. Some growers have converted older machines to spot apply pesticides to crop plants rather than thin lettuce. Spot spraying just the crop plant makes sense – it reduces applied chemical amount by about 1/3rd as compared to band spraying and by roughly 90% as compared to broadcast. I have heard reports of improved efficacy with this technique, perhaps due to better coverage, however this potential benefit has not been validated in formal trials.
A drawback with automated thinning machines is their high cost. Retail prices for machines are approximately $25,000 per seed line, or about $200,000 for a 4-row, 2-line machine. Another option might be to use automated systems designed for spot spraying weeds. These devices have been commercially available since the mid 90’s and function similarly to automated thinning machines in that they use optical sensors to detect plants and solenoid activated spray assemblies to intermittingly spray unwanted plants (Fig. 1). The cost of these devices is quite reasonable – about $3,000 per unit, or about $24,000 for a 4-row, 2-line machine.
Automated spot sprayers are typically used in agriculture to control weeds in fallow fields (Fig. 2), but could easily be adapted to apply pesticides or even fertilizer to vegetable crops. Spot applying foliar fertilizers to vegetable crops is an interesting concept and is being investigated in California with lettuce.
Another potential use of spot sprayers is to control herbicide resistant weeds. The device can be positioned between crop rows to spot spray a non-selective herbicide to target weeds. Placing the sprayer in a hooded enclosure prevents unwanted drift onto crop plants. We are conducting trials using this technique in cotton this season (Fig. 3). We are also looking for collaborators interested in trying the device as a pesticide and/or fertilizer spot applicator in vegetable crops for this upcoming season. If you are interested collaborating or would like to see a demo of the device, please feel free to reach out to me.
Corn earworm: First significant CEW moth activity since mid-November; particularly active in Dome/Wellton/Tacna areas.
Beet armyworm: Moth counts remain very low consistent with seasonal temperatures, but below average for this point in the season.
Cabbage looper: Slight increase in activity, but moth counts remain unusually low for this time of season.
Whitefly: Adult movement is at seasonal low consistent with temperatures and lack of melons or cotton.
Thrips: Thrips activity beginning to pick up, particularly in Tacna and Yuma Valley. Movement is still below average for February.
Aphids: Seasonal aphid counts peaked in early February and tending down last week. Counts remain high in Gila Valley and Wellton. Above average for this time of year.
Leafminers: Adult activity remains light in most trap locations. Trap counts increasing slightly in the South Gila Valley.